"V" SEAL PAC 0784711 - Caterpillar

Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Coolant System
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.
To relieve the pressure from the coolant system, turn off the machine. Allow the cooling system pressure cap to cool. Remove the cooling system pressure cap slowly in order to relieve pressure.Hydraulic System
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Park on a level surface. If you must park on a grade, chock the machine.
Apply the service brake in order to stop the machine. Move the transmission control lever to the NEUTRAL position.
Reduce engine speed to low idle.
Engage the parking brake.
Engage the transmission neutral lock.
Lower all attachments to the ground.
Stop the engine.
Turn the engine start switch key to OFF position for 4 seconds.
Turn the engine start switch key back to ON position.
Press the hydraulic shutoff switch to the ON position.
Operate all hydraulic controls through all positions in order to relieve hydraulic pressure. Repeat this step until all hydraulic pressure is released.
Move the hydraulic control levers to the HOLD position.
Turn the engine start switch to OFF position and remove the key.