0969527 V-BELT SET Caterpillar parts
311, 320 L
Rating:
Alternative (cross code) number:
CA0969527
096-9527
0969527
CA0969527
096-9527
0969527
Weight: 0.90 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for GMC C6500 Topkick 7.8L 2008 2009, for C7500 Topkick 7.8L 2008 2009, for C8500 Topkick 7.8L 2008 2009
dwvksz Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Chevrolet C6500 Kodiak 7.8L 2008 2009, for Chevrolet C7500 Kodiak 7.8L 2008 2009 || Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for GMC C6500 Topkick 7.8L 2008 2009, for GMC C7500 Topkick 7.8L 2008 2009, for GMC C8500 Topkick 7.8L 2008 2009 || Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Chevrolet C8500 7.8L 2008 2009 || Replace Numbers: 15691, 0969527, 74913A, 9118816, 1146A7, AE1631, REMF8450, ZAH22463, 178477, 54575 || Contents of the Package: 1 Water Pump Accessory Drive Belt
dwvksz Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Chevrolet C6500 Kodiak 7.8L 2008 2009, for Chevrolet C7500 Kodiak 7.8L 2008 2009 || Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for GMC C6500 Topkick 7.8L 2008 2009, for GMC C7500 Topkick 7.8L 2008 2009, for GMC C8500 Topkick 7.8L 2008 2009 || Vehicle Applications: 1x Water Pump Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Chevrolet C8500 7.8L 2008 2009 || Replace Numbers: 15691, 0969527, 74913A, 9118816, 1146A7, AE1631, REMF8450, ZAH22463, 178477, 54575 || Contents of the Package: 1 Water Pump Accessory Drive Belt
1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Isuzu FTR 7.1L 1997 1998, for FVR 7.1L 1997 1998, for FSR 7.8L 2001, for FTR 7.8L 2001
dwvksz Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Ford LNT9000 14.0L 1984 1985 1986 1987 1988 1989, for Ford LN9000 14.0L 1984 1985 1986 1987 1988 1989 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Auburn Model 6-85 3.0L 1930, for Auburn Model 8-95 4.1L 1930, for Isuzu FSR 7.1L 1997 1998 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Isuzu FTR 7.1L 1997 1998, for Isuzu FVR 7.1L 1997 1998, for Isuzu FSR 7.8L 2001, for Isuzu FTR 7.8L 2001 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Isuzu FVR 7.8L 2001 || Contents of the Package: 1 Fan Accessory Drive Belt; Replace Numbers: 15691, 0969527, 74913A, 9118816, 1146A7, AE1631, REMF8450, ZAH22463, 178477, 54575
dwvksz Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Ford LNT9000 14.0L 1984 1985 1986 1987 1988 1989, for Ford LN9000 14.0L 1984 1985 1986 1987 1988 1989 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Auburn Model 6-85 3.0L 1930, for Auburn Model 8-95 4.1L 1930, for Isuzu FSR 7.1L 1997 1998 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Isuzu FTR 7.1L 1997 1998, for Isuzu FVR 7.1L 1997 1998, for Isuzu FSR 7.8L 2001, for Isuzu FTR 7.8L 2001 || Vehicle Applications: 1x Fan Serpentine Belt, Accessory Drive Belt Replaces# 15691, 0969527 Dwvksz for Isuzu FVR 7.8L 2001 || Contents of the Package: 1 Fan Accessory Drive Belt; Replace Numbers: 15691, 0969527, 74913A, 9118816, 1146A7, AE1631, REMF8450, ZAH22463, 178477, 54575
Fan Accessory Drive Belt 2PC Replaces 054011631211, 0969527 for Ford LNT9000 14.0L 1984 1985 1986 1987 1988 1989
Taungkan Fan Accessory Drive Belt Replaces 054011631211, 0969527 for LN9000 1984 1985 1986 1987 1988 1989 for LNT9000 1984 1985 1986 1987 1988 1989 for Isuzu FTR 1997 for Isuzu FVR 1997 || 2 Fan Accessory Drive Belt || Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
Taungkan Fan Accessory Drive Belt Replaces 054011631211, 0969527 for LN9000 1984 1985 1986 1987 1988 1989 for LNT9000 1984 1985 1986 1987 1988 1989 for Isuzu FTR 1997 for Isuzu FVR 1997 || 2 Fan Accessory Drive Belt || Important Note: Please use Amazon's vehicle fitment tool first to confirm if the part is correct for your vehicle
Number on catalog scheme:
9
For full view, you need register
Information:
Removal procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Plug and cap all open ports and tube assemblies.
Illustration 1 g01304121
Illustration 2 g01304528
Loosen hose clamps (5) and remove air inlet hose (1).
Remove allen head screws (21) and remove exhaust elbow (19) from turbocharger (4). Remove gasket (18) from the turbocharger.
Remove banjo bolt (2) and washers (3). Remove the fasteners and the spacers (not shown) for tube clips (6). Remove bolts (14) and remove tube assembly (13) from the cylinder block. Remove O-ring seal (12).
Remove bolts (8) and disconnect tube assembly (10) from the turbocharger. Remove joint (7). If necessary, remove bolts (9) and remove tube assembly (10) from the cylinder block. Remove joint (11).
Remove nuts (17) and remove turbocharger (4) from the exhaust manifold. Remove gasket (20) from the exhaust manifold. If necessary, remove studs (15) from the exhaust manifold. Note: Do not use the actuator rod of the wastegate to lift the turbocharger.Installation procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the turbocharger is clean and free from damage. Inspect the turbocharger for wear. If the turbocharger is worn, the complete turbocharger must be replaced.
Test the actuator for correct operation. Refer to Systems Operation, Testing and Adjusting, "Wastegate - Test" for more information. If the actuator is damaged or the actuator does not operate within the specified limits, the complete turbocharger must be replaced.
Illustration 3 g01304121
Illustration 4 g01304528
Clean the mating surfaces of the exhaust manifold. If necessary, install studs (15) to the exhaust manifold. Tighten the studs to a torque of 18 N m (13 lb ft). Install a new gasket (20) over the studs.
Position turbocharger (4) onto the exhaust manifold. Install nuts (17) and tighten to a torque of 25 N m (18 lb ft). Note: Do not use the actuator rod of the wastegate to lift the turbocharger .
Ensure that tube assemblies (10) and (13) are clean and free from damage. If necessary, replace the tube assemblies.
If necessary, position a new joint (11) and tube assembly (10) onto the cylinder block. Install bolts (9). Tighten the bolts finger tight. Position a new joint (7) on tube assembly (10). Align tube assembly (10) to the bottom of the turbocharger. Install bolts (8). Tighten the bolts finger tight.Tighten bolts (8) and (9) to a torque of 10 N m (89 lb in).
Lubricate the bearings of turbocharger (4) with clean engine oil through oil inlet port (16). Rotate the shaft of the turbocharger in order to distribute the lubricant.
Install a new O-ring seal (12) to tube assembly (13). Position tube assembly (13) against the cylinder block. Install bolts (14). Tighten the bolts to a torque of 10 N m (89 lb
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Plug and cap all open ports and tube assemblies.
Illustration 1 g01304121
Illustration 2 g01304528
Loosen hose clamps (5) and remove air inlet hose (1).
Remove allen head screws (21) and remove exhaust elbow (19) from turbocharger (4). Remove gasket (18) from the turbocharger.
Remove banjo bolt (2) and washers (3). Remove the fasteners and the spacers (not shown) for tube clips (6). Remove bolts (14) and remove tube assembly (13) from the cylinder block. Remove O-ring seal (12).
Remove bolts (8) and disconnect tube assembly (10) from the turbocharger. Remove joint (7). If necessary, remove bolts (9) and remove tube assembly (10) from the cylinder block. Remove joint (11).
Remove nuts (17) and remove turbocharger (4) from the exhaust manifold. Remove gasket (20) from the exhaust manifold. If necessary, remove studs (15) from the exhaust manifold. Note: Do not use the actuator rod of the wastegate to lift the turbocharger.Installation procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the turbocharger is clean and free from damage. Inspect the turbocharger for wear. If the turbocharger is worn, the complete turbocharger must be replaced.
Test the actuator for correct operation. Refer to Systems Operation, Testing and Adjusting, "Wastegate - Test" for more information. If the actuator is damaged or the actuator does not operate within the specified limits, the complete turbocharger must be replaced.
Illustration 3 g01304121
Illustration 4 g01304528
Clean the mating surfaces of the exhaust manifold. If necessary, install studs (15) to the exhaust manifold. Tighten the studs to a torque of 18 N m (13 lb ft). Install a new gasket (20) over the studs.
Position turbocharger (4) onto the exhaust manifold. Install nuts (17) and tighten to a torque of 25 N m (18 lb ft). Note: Do not use the actuator rod of the wastegate to lift the turbocharger .
Ensure that tube assemblies (10) and (13) are clean and free from damage. If necessary, replace the tube assemblies.
If necessary, position a new joint (11) and tube assembly (10) onto the cylinder block. Install bolts (9). Tighten the bolts finger tight. Position a new joint (7) on tube assembly (10). Align tube assembly (10) to the bottom of the turbocharger. Install bolts (8). Tighten the bolts finger tight.Tighten bolts (8) and (9) to a torque of 10 N m (89 lb in).
Lubricate the bearings of turbocharger (4) with clean engine oil through oil inlet port (16). Rotate the shaft of the turbocharger in order to distribute the lubricant.
Install a new O-ring seal (12) to tube assembly (13). Position tube assembly (13) against the cylinder block. Install bolts (14). Tighten the bolts to a torque of 10 N m (89 lb
Caterpillar parts catalog:
Parts v Caterpillar catalog:
216, 228, 236, 247, 248, 267, 287, 320 L, 910E, 980G, 980G II, 980H, D343, IT12B
1676, 3116, 312C, 312C L, 320 L, 320N, 613, 992, C9, TH210, TH215
3034, 311, 312, 314C, 315, 317
1R7171
V-BELT
311, 312, 320 L, E110B, E120B, E200B
311, 312, 320 L, E110B, E120B, E200B
5I7967
V-BELT
320 L, 320N
320 L, 320N
307
1120168
V-BELT
307
307
307
307, E110
1R7171
V-BELT
311, 312, 320 L, E110B, E120B, E200B
311, 312, 320 L, E110B, E120B, E200B
1352409
V-BELT SET
311B, 312B
311B, 312B
2067870
V-BELT
973C, D6R II, D6R III
973C, D6R II, D6R III
936, 936F, 973C, G936
963, 973, 973C, D5H
D6R, D7R
814B, 815B, 966F, 966F II, 970F, 972G, D6R, D7H
1477177
V-BELT SET
315B
315B