1170036 V-BELT Caterpillar parts
527, 776C, 776D, 777B, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C
Rating:
Alternative (cross code) number:
CA1170036
117-0036
1170036
CA1170036
117-0036
1170036
Weight: 0.58 pounds 0 kg.
Information:
EFFECTIVE LENGTH
2187
mm
GROOVE WIDTH
12.7
mm
TRACK SKIDDER, TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1170036 External Engine V-Belt
CTP For External Engine || Highly Efficient || Easy in-and-out fit
CTP For External Engine || Highly Efficient || Easy in-and-out fit
CTP 1170036 External Engine V-Belt
CTP For External Engine || Highly Efficient || Easy in-and-out fit
CTP For External Engine || Highly Efficient || Easy in-and-out fit
Number on catalog scheme:
21
For full view, you need register
Compatible equipment models: 1170036:
Information:
Illustration 1 g02864176
Top view
(1) Actuator Install actuator (1) so that inlet port (2) and outlet port (3) are aligned as shown. The ports on the actuator are stamped "Inlet" and "Outlet". Torque for the nut on the actuator ... 200 20 N m (148 15 lb ft)
Illustration 2 g02864180
View A-A
(4) Install the rod the so that there is equal thread engagement at each end. (5) Torque for the nut ... 25 6 N m (18 4 lb ft) (6) Torque for the nut ... 25 6 N m (18 4 lb ft) (7) Apply 4C-4030 Thread Lock Compound to the threads of the rod end. (A) Angle of the lever with the fuel valve in the closed position ... 25 degrees (B) Distance from the center of the clevis eye to the mounting plate with the fuel valve in the closed position ... 140 mm (5.5 inch) (C) Angle of the lever with the fuel valve in the open position ... 5 degrees (D) Distance from the center of the clevis eye to the mounting plate with the fuel valve in the open position ... 107 mm (4.2 inch) (E) Length of the assembled rod and the centers of the eyes of the rod ends ... 235 mm (9.25 inch)
Illustration 3 g02864182
Rear view
(8) Orient the bearings so that the lube fittings are accessible. Lubricate the bearings with a 5P-0960 Grease Cartridge (MOLYBDENUM). (9) Apply 4C-4030 Thread Lock Compound to the threads of the tube.
Illustration 4 g02864196
View B-B
(10) Torque for the nuts ... 25 6 N m (18 4 lb ft) (F) Distance from the fuel valve to the center of the clevis eye with the fuel valve closed ... 139 mm (5.5 inch) (G) Angle of the lever with the fuel valve open ... 30 degrees (H) Length of the assembled rod and the centers of the eyes of the rod ends ... 100 mm (3.9 inch) (i) Distance from the fuel valve to the center of the clevis eye with the fuel valve open ... 158 mm (6.2 inch) (11) The actuator must fully extend in order to close the fuel valve but the actuator must not over rotate the valve stem. Perform the final adjustment of the linkage.
With the actuator fully extended and the fuel valve closed, rotate the clevis for 180 degrees away from the metering valve.
Lock the linkage and ensure that the valve can still open fully.
Caterpillar parts catalog:
Parts v Caterpillar catalog:
3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3512, 777C, 777D, 777F, 777G, C15, C18, CX31-C18I, CX35-C18I
3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 3508, 3512, 3516, 776C, 776D, 777, 777B, 777D, C15, C18, C9.3, CX31-C18I, CX35-C18I, G3508, G3512, G3516
12E, 3126B, 3176C, 3196, 517, 527, 627B, C-10, C-12, C-9, C7, C9, CX31-C9I, D4H, D4H XL, D4HTSK III, TH31-E61
3208, 3508, 3512, 3516, 789, D11N, G3512, G3516
3116, 3126B, 3208, 784C, 785C, 789C, 793C, 950F II, D8H
784C, 785C, 789C, 793C, AD55, M318
776C, 777B, 963B
789C, 793, 793B, 994
784B, 785, 785B, 789B, 793B, 994
784B, 784C, 785, 785B, 785C, 785D, 789, 789B
776D, 777, 777D, 784C, 785C, 785D, 789C
785C
950F
950B, 950B/950E
988B, AD45, AE40 II
3743609
V-BELT SET
994D, 994F, 994H
994D, 994F, 994H
1417138
V-BELT
854G, 992G
854G, 992G
1126055
V-BELT
992G
992G
2808728
V-BELT SET
773F, 775F
773F, 775F
1572830
V-BELT
797
797
1643780
V-BELT SET
769D, 771D, 773E
769D, 771D, 773E
785C
776D, 777, 777D, 784C, 785C, 785D, 789C
784B, 784C, 785, 785B, 785C, 785D, 789, 789B