V-BELT SET 1262240 - Caterpillar

Illustration 1 g01034112
Disconnect hose assemblies (1) and (2). Remove relief valve (3) .
Illustration 2 g01034122
Attach a suitable lifting device to implement pump (4). Remove bolts (5) and remove implement pump (4). The weight of implement pump (4) is approximately 22 kg (50 lb).
Illustration 3 g01034126
Disconnect hose assemblies (6) .
Illustration 4 g01034140
Remove clips (7) .
Illustration 5 g01034154
Remove bolts (8) and lay valve group (9) to the side.
Illustration 6 g01034160
Remove clip (10) .
Illustration 7 g01034163
Remove oil filler tube assembly (11) and the tube for the oil level dipstick (12) .
Illustration 8 g01034200
Disconnect hose assemblies (13) and tube assembly (14) .
Illustration 9 g01034206
Disconnect hose assemblies (15). Remove clip (16) .
Illustration 10 g01034212
Remove bolts (17) from bracket assembly (18) .
Illustration 11 g01034224
Attach Tooling (A) and a suitable lifting device to filter group (19). Remove bolts (20) and remove filter group (19) .
Illustration 12 g01034229
Disconnect wire (21) and remove clip (22) .
Illustration 13 g01034236
Position Tooling (B) under the flywheel housing (23) in order to support the rear of the engine.
Illustration 14 g01034237
Attach Tooling (A) and a suitable lifting device by using to the pump drive (24). Remove bolts (25) .
Illustration 15 g01034244
Remove bolts (26).
Illustration 16 g01034251
Remove pump drive (24). The weight of pump drive (24) is approximately 208 kg (460 lb).