V-BELT SET 1275563 - Caterpillar

Refer to Operation and Maintenance Manual , "Product Link" for further information.(15) Do Not Weld or Drill on ROPS
Illustration 4 g01970802
If equipped, this safety message is located on the pillar in the cab.
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.(16) Pressurized SystemThis safety message is located on the inside of the access cover for the radiator.
g01067344
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check" for further information.(17) High Pressure GasThis safety message is found on each accumulator cylinder.
g01069338
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
(18) High Pressure GasThis safety message is found on the main accumulator.
g01374065
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
(19) Relieve Hydraulic Tank PressureThis safety message is located on the hydraulic tank.
g01067344
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
(20) Hot SurfaceThis safety message is found on the engine hood.
g01069358
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.