V-BELT 1478910 - Caterpillar

LATER
EARLIER(1) When nozzles (7) have been installed, remove plugs (1) (12 plugs). Start the engine and check for fuel leakage at plug openings. If there is leakage, stop engine and correct leak. Install the plugs. Put 5P3413 Pipe Sealant on threads of plugs.(2) Torque for the nuts that hold the fuel lines ... 30 5 lb.ft.(40 7 N m)(3) Put 9S3264 Pipe Sealant on union at installation.(4) Torque for the nuts that hold the nozzles: First torque ... 85 lb.ft.(115 N m)Last torque ... 105 5 lb.ft.(142 7 N m)(5) Body.(6) 1P7324 Glow Plugs (24 V): Torque with 5P3931 Anti-Seize Compound ... 10 2 lb.ft.(14 3 N m)Current draw at 24 V (1 glow plug) ... approx. 6.5 ACurrent draw at 24 V (for each side of engine) ... 33.5 to 39A(7) Tighten nozzle finger tight on body (5).(8) Torque for precombustion chamber ... 150 10 lb.ft.(205 14 N m) Put 5P3931 Anti-Seize Compound on threads of precombustion chamber.