2W3906 V-BELT Caterpillar parts
D5H, D5HTSK II
Rating:
Alternative (cross code) number:
CA2W3906
2W-3906
2W3906
CA2W3906
2W-3906
2W3906
Weight: 0.52 pounds 0 kg.
Information:
EFFECTIVE LENGTH
2235
mm
GROOVE WIDTH
12.7
mm
TRACK SKIDDER, TRACK-TYPE TRACTOR,
Number on catalog scheme:
6
For full view, you need register
Information:
The Electronic Control Module (ECM) detects atmospheric pressure that is too low. Information on default settings and ranges for this event can be found in troubleshooting with an event code Troubleshooting, "Event Codes".System Response:The ECM will log the diagnostic event.Possible Performance Effect:E009-2 (Derate)
The engine will be derated.Troubleshooting:
The engine is being operated at an altitude that is too high.
There may be a problem with the atmospheric pressure sensor.Test Step 1. Check for Diagnostic Codes
Connect the Caterpillar Electronic Technician (ET) to the service tool connector.
Restore the electrical power to the ECM.
Check for any active diagnostic codes or logged diagnostic codes. Wait at least 30 seconds in order for the codes to become active. Expected Result:No diagnostic codes are present.Results:
OK - The engine is still derated. The engine is being operated at an altitude that is too high.STOP
Not OK - Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual.Ensure that the repair eliminates the problem.STOP
The engine will be derated.Troubleshooting:
The engine is being operated at an altitude that is too high.
There may be a problem with the atmospheric pressure sensor.Test Step 1. Check for Diagnostic Codes
Connect the Caterpillar Electronic Technician (ET) to the service tool connector.
Restore the electrical power to the ECM.
Check for any active diagnostic codes or logged diagnostic codes. Wait at least 30 seconds in order for the codes to become active. Expected Result:No diagnostic codes are present.Results:
OK - The engine is still derated. The engine is being operated at an altitude that is too high.STOP
Not OK - Repair: Repair the diagnostic codes that are present. Refer to the appropriate topic in the "Troubleshooting With a Diagnostic Code" section of this manual.Ensure that the repair eliminates the problem.STOP
Caterpillar parts catalog:
Parts v Caterpillar catalog:
3126B, 3176C, 3196, 920, 930, 930R, 966C, C-10, C-12, C-9, C13, C7, C9, CX31-C13I, CX31-C9I, D5, D5B, D5H, D5H XL, D5HTSK II, D6C, TH31-E61
120G, 3126B, 3176C, 3196, 627B, C-10, C-12, C-9, C7, C9, CX31-C9I, D5H, D5H XL, D5HTSK II, D6C, D6E, D6G, D6G2 LGP, D6G2 XL, TH31-E61
14G, 3126B, 3176C, 3196, 920, 977L, C-10, C-12, C-9, C7, C9, CX31-C9I, D5, D5H, D5H XL, D6C, D6D, D6D SR, D6E SR, TH31-E61
963, 973, 973C, D5H
1031612
V-BELT
517, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II
517, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II
6I1758
V-BELT
D5H
D5H
1031612
V-BELT
517, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II
517, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II
9Y9702
V-BELT
589
589
589, D8L, D9N
814B, 815B, 966D, 973
916, 926, 973C, D6R II, D6R III, D7R XR, D9R, IT28
938F, 950F, 950F II, 960F, 963B
776C, 777B, 963B
928G, 963B, IT28G
533, 543, 933, 933C, 939, 939C, D3C III, D4C III, D4D, D5C III, TK370, TK371, TK380
950F, 953B
554, 615C, 815B, 910K, 914K, 936F, 950B, 963, 966F, 966F II, 970F, D11N, D11R, D6H, D6H XL, D6H XR, D7H