V-BELT SET 4P8013 - Caterpillar

Use Tooling (D) to install seal (21) .
Illustration 2 g01002709
Use Tooling (B) to install retaining ring (22) .
Illustration 3 g01002710
Use Tooling (D) to install seal (20) .
Illustration 4 g01002632
Install retaining ring (19) on shaft (16) .
Illustration 5 g01002630
Install bearing (17) on shaft (16). Install retaining ring (18) on shaft (16) .
Install Tooling (E) to shaft (16) .
Illustration 6 g01002711
Use Tooling (C) and a suitable press to install the shaft into body (4) .
Illustration 7 g01002624
Use Tooling (A) to install retaining ring (15) .
Illustration 8 g01002587
Install seals (14) and (13) to plate (10) .
Illustration 9 g01004983
Illustration 10 g01004991
Note: Install the vanes with the sharp edge of the vanes in the direction of pump rotation. The arrow on the cam ring indicates the direction of pump rotation.
Install pins (12A) and vanes (12) to rotor (11) .
Illustration 11 g01002570
Install rotor (11) to plate (10). Install vanes (12) to rotor (11) .
Illustration 12 g01002569
Install ring (9) to plate (10) .
Illustration 13 g01002563
Install bushing (8) to plate (7). Use Tooling (D) to install bushing (8) .
Illustration 14 g01002561
Install plate (7) to cartridge (3). Install bolts (6) to plate (7) .
Illustration 15 g01002558
Install O-ring seal (5) to body (4). Install cartridge (3) to body (4) .
Illustration 16 g00579746
Install cover (2). Install bolts (1) .End By: Install the equipment pump. Refer to Disassembly and Assembly, "Equipment Pump - Install".