V-BELT SET 6I4446 - Caterpillar

Advisor Display Module
Illustration 1 g02623056
(1) Truck ID Button (2) Zero Button (3) Clear Button (4) Reweigh Button (5) Delay Button (6) Left and Up Arrow Button (7) Right and Down Arrow Button (8) Back Arrow Button (9) Home Button (10) OK Button (11) LCD Display (12) Arrow that indicates more options (13) Ambient Temperature (14) HVAC Temperature Mode (15) HVAC Temperature SettingThe Advisor display module is located on the right side of the dash panel. The Advisor display module interfaces with the electronic system. The Advisor also controls the instrument cluster.Five buttons on the right side of the Advisor display module are the user interface. Use the buttons for the following purposes: navigation buttons, menu buttons and data information.There are five LED dual function Buttons to the left of the Advisor display. These buttons will be used as shortcuts to the following functions associated with the Payload System on the 994H.Truck ID Button (1) - This button will activate the Truck ID selection screen. The button will light up while the Truck ID selection screen is active.Zero Button (2) - Zero/tare the payload system when prompted by the Advisor display, or when an additional need to do so such as accumulation of material in the bucket. This button will light up briefly when pressed to acknowledge selection.Clear Button (3) - This button allows the current bucket load to be excluded from payload memory. This button may be pressed multiple times to clear all bucket loads since the last time that the Store button was depressed. The payload screen will update to reflect that the payload information has been cleared. This button will light up briefly when pressed to acknowledge selection.Reweigh Button (4) - This button allows the user to reweigh the current bucket load. This button will light up briefly when pressed to acknowledge selection.Delay Button (5) - This button will activate the Delay selection screen. This function may also be accessed by selecting "Delay" from the Payload main menu. The button will light up while a delay code is active (including auto-delay).Left and Up Button (6) - This button is used for the following purposes: navigation button, data information and a decrease in a setting value.Right and Down Button (7) - This button is used for the following purposes: navigation button, data information and an increase in a setting value.Back Button (8) - This button is used in order to return to the previous screen.Home Button (9) - This button is used in order to return to the "Home Menu" from any screen.OK Button (10) - This button is used to make selections on the screen. Also, use this button in order to confirm a password entry or use the button to save an operator profile.Display (11) - This display area shows the numerous menus and submenus in order to navigate from one screen to another screen. Also, this display area depends on the menu item selected in order to show the information in the system, system status,