7N3122 V-BELT SET Caterpillar parts
3412, 3412C, 3412E, G3412
Rating:
Alternative (cross code) number:
CA7N3122
7N-3122
7N3122
CA7N3122
7N-3122
7N3122
Weight: 4 pounds 1 kg.
GAS ENGINE, INDUSTRIAL ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
D&D PowerDrive 7N3122 Caterpillar Replacement Belt, 98" Length, 0.62" Width
D&D PowerDrive Belt BX 21/32 x 98in OC || Material type: rubber || Manufactured by D&D PowerDrive || Made in China
D&D PowerDrive Belt BX 21/32 x 98in OC || Material type: rubber || Manufactured by D&D PowerDrive || Made in China
Caterpillar OEM Replacement Belt. Replace 7N3122 Cogged Classical V-Belt (5/8" X 98") BX95(5)
AJANTA BELT OEM Replacement V-belt/Agriculture mchinary Replacement Belt || Heat & Wear Resistance || Double Fabric Layer || Smoth and Quiet Operation/Lesser Break-Downs || Long Life/Power Saving
AJANTA BELT OEM Replacement V-belt/Agriculture mchinary Replacement Belt || Heat & Wear Resistance || Double Fabric Layer || Smoth and Quiet Operation/Lesser Break-Downs || Long Life/Power Saving
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 7N3122:
Information:
Machine preparation
Move the machine to a smooth horizontal location. Move away from working machines and personnel. Lower the attachments to the ground.
Allow only one operator on the machine. Keep all personnel away from the machine or in the view of the operator.
Engage the parking brake.
Place the transmission in NEUTRAL.Performance Test
Steering Cycle Times
The steering time is affected by the amount of oil flow that is produced by the steering pump. Check the steering times in order to determine if there is a problem with the steering pump.
Perform the machine preparation for testing.
Start the machine. Run the machine at HIGH idle. Warm the hydraulic oil to normal operating temperature. Raise the bucket slightly off the ground. Make sure that no people or no other machines are in the immediate area of the machine so that you can articulate the machine safely.
Run the machine at LOW idle.
Tap the horn. Turn the machine from left to right. Record the steering time from stop to stop.
Run the machine at HIGH idle.
Turn the machine from left to right. Record the steering time from stop to stop.
Turn the machine from right to left. Record the steering time from stop to stop.
The steering times for machines that are equipped with conventional steering are listed in Table 1.
Table 1
Steering Cycle Times
Idle Direction 914G IT14G IT14G
LOW Left to Right 5.2 seconds 5.2 seconds 5.2 seconds
HIGH Left to Right 3.0 0.6 seconds 3.0 0.6 seconds 3.0 0.6 seconds
HIGH Right to Left 3.0 0.6 seconds 3.0 0.6 seconds 3.0 0.6 seconds Note: Table 1 lists the specifications for the turns. While the parking brake is engaged, the difference between the left turn and the right turn should increase by no more than 0.2 seconds.
Lower the boom and place the bucket flat on the ground.
Reduce engine speed to LOW idle.
Stop the engine.Compare the test results with the cycle times that are listed. The steering pump should be working properly if the cycle times match the cycle times that are listed.If the cycle times are not correct one of the following conditions may be present:
The pressure setting for the backup relief valve is not within specifications.
The pump may have excessive wear.The main relief pressure should be measured. If the main relief pressure is low, the cycle times should be retested after the main relief pressure has been corrected.Reference: For more information on testing and adjusting the main relief valve, refer to the Service Manual module Testing and Adjusting, "Relief Valve - Test and Adjust" for
Move the machine to a smooth horizontal location. Move away from working machines and personnel. Lower the attachments to the ground.
Allow only one operator on the machine. Keep all personnel away from the machine or in the view of the operator.
Engage the parking brake.
Place the transmission in NEUTRAL.Performance Test
Steering Cycle Times
The steering time is affected by the amount of oil flow that is produced by the steering pump. Check the steering times in order to determine if there is a problem with the steering pump.
Perform the machine preparation for testing.
Start the machine. Run the machine at HIGH idle. Warm the hydraulic oil to normal operating temperature. Raise the bucket slightly off the ground. Make sure that no people or no other machines are in the immediate area of the machine so that you can articulate the machine safely.
Run the machine at LOW idle.
Tap the horn. Turn the machine from left to right. Record the steering time from stop to stop.
Run the machine at HIGH idle.
Turn the machine from left to right. Record the steering time from stop to stop.
Turn the machine from right to left. Record the steering time from stop to stop.
The steering times for machines that are equipped with conventional steering are listed in Table 1.
Table 1
Steering Cycle Times
Idle Direction 914G IT14G IT14G
LOW Left to Right 5.2 seconds 5.2 seconds 5.2 seconds
HIGH Left to Right 3.0 0.6 seconds 3.0 0.6 seconds 3.0 0.6 seconds
HIGH Right to Left 3.0 0.6 seconds 3.0 0.6 seconds 3.0 0.6 seconds Note: Table 1 lists the specifications for the turns. While the parking brake is engaged, the difference between the left turn and the right turn should increase by no more than 0.2 seconds.
Lower the boom and place the bucket flat on the ground.
Reduce engine speed to LOW idle.
Stop the engine.Compare the test results with the cycle times that are listed. The steering pump should be working properly if the cycle times match the cycle times that are listed.If the cycle times are not correct one of the following conditions may be present:
The pressure setting for the backup relief valve is not within specifications.
The pump may have excessive wear.The main relief pressure should be measured. If the main relief pressure is low, the cycle times should be retested after the main relief pressure has been corrected.Reference: For more information on testing and adjusting the main relief valve, refer to the Service Manual module Testing and Adjusting, "Relief Valve - Test and Adjust" for
Caterpillar parts catalog:
Parts v Caterpillar catalog:
3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C15, C18
3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-15, C-16, C15, C18, C27, C32, CX31-C15I, CX31-C18I, CX35-C18I, CX35-P800, D350E, D35HP, D400, D400E, D40D, RM-350B, SM-350, TH35-C1...
322, 322 LN, 322B LN, 322C, 325B L, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, C13, C15, C18, CX31-C13I, CX35-P800, G3406, M325B
3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-15, C15, C27, CX31-C15I, D346, TH35-C15I
3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, 375, 375 L, 5080, 621G, 623G, 627F, 627G, 651B, 657B, C-15, C-16, C15, C18, CX31-C18I, CX35-C18I, G3406, G3412
3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, G3412
3116, 3408, 3408B, 3408C, 3412, 3412C, 3412E, 631E, 633D, 637D, 637E, 639D, 651E, 657E, 69D, 768C, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 988B, 988F, 988F II, 992C, 99...
3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3456, C-15, C-16, C13, C15, C15 I6, C18, C18 I6, CX31-C13I, CX31-C15I, CX35-P800, D350E, D400E, G3406, G3408, G3408C, G3412, HT400, PM-465, ...
3408, 3408C, 3408E, 3412, 3412C, 3412E, 834B, 836, 988F II, C13, C15, C18, C32, CX31-C13I, CX31-C15I, CX35-P800, TH35-C15I
3412, 3412C, 3412E
3412, 3412C, 3412E
1140, 1145, 1673, 1673B, 1673C, 3054, 3054B, 3054C, 3054E, 3160, 3208, CP-433C, CS-431C, CS-563C, CS-573C, CS-583C
1013282
V-BELT SET
3054, 3054B, 3056, 312, 312B L, 312C, 315, 315B L, 317, CS-423E
3054, 3054B, 3056, 312, 312B L, 312C, 315, 315B L, 317, CS-423E
1285247
V-BELT SET
3054, 3054B, 3056, C4.4, SPF343C
3054, 3054B, 3056, C4.4, SPF343C
1214365
V-BELT SET
3054, 3054B, 3054C, 3054E, 3056, CS-323C, CS-423E, M313C
3054, 3054B, 3054C, 3054E, 3056, CS-323C, CS-423E, M313C
1530250
V-BELT SET
3508, 3508B, 3512
3508, 3508B, 3512
2064865
V-BELT
3516B
3516B
3512B, 3512C
3116688
V-BELT
3516B, 3516C
3516B, 3516C
2052922
V-BELT SET
3516B, PM3516, PMG3516
3516B, PM3516, PMG3516
2114904
V-BELT
3516B, SCT673
3516B, SCT673