V-BELT 9L0894 - Caterpillar

Illustration 1 g00520356
(1) The top ring must be installed with the yellow colored strip to the right of the ring end gap. Install the top ring with the "UP-1" facing upward. The ring end gap must be 120 20 degrees from the adjacent ring end gap. (2) The intermediate ring must be installed with the green colored strip to the right of the ring end gap. Install the intermediate ring with the "UP-2" facing upward. The ring end gap must be 120 20 degrees from the adjacent ring end gap. (3) The third ring must be installed with the red colored strip to the right of the ring end gap. Install the "UP-3" facing upward. The ring end gap must be 120 20 degrees from the adjacent ring end gap. (4) Install the oil control ring and the ring expander with the gaps at an angle of 180 degrees across from each other. The white colored portion of the ring expander must be visible through the oil control ring gap.Note: The values in Table 2 are specifications for a new piston.
Table 1
Piston and Piston Rings    
    (1) Top Ring     (2) Intermediate Ring     (3) Third Ring     (4) Oil Control Ring    
Width Of Groove In New Piston     5.160 0.010 mm (0.2031 0.0004 inch)    
5.160 0.010 mm (0.2031 0.0004 inch)    
5.050 0.010 mm (0.1988 0.0004 inch)    
8.050 0.010 mm (0.3169 0.0004 inch)    
Width Of Piston Ring    
4.9825 0.0075 mm (0.1962 0.0003 inch)    
4.9825 0.0075 mm (0.1962 0.0003 inch)    
4.915 0.025 mm (0.1935 0.0010 inch)    
7.925 0.011 mm (0.3120 0.0004 inch)    
Clearance Between Groove and Piston Ring    
0.1775 0.0175 mm (0.0070 0.0007 inch)    
0.1775 0.0175 mm (0.0070 0.0007 inch)    
0.135 0.035 mm (0.0053 0.0014 inch)    
0.125 0.021 mm (0.0049 0.0008 inch)    
Piston Ring End Gap (1)
   
1.05 0.15 mm (0.0413 0.0059 inch)    
1.40 0.10 mm (0.0551 0.0039 inch)    
1.35 0.15 mm (0.0531 0.0059 inch)    
1.10 0.20 mm (0.043 0.008 inch)    
( 1 ) The given value is for rings that are installed in a bore of 280 mm (11.024 inch).Bore in the piston for the pin ... 120.028 0.008 mm (4.7255 0.0003 inch)Diameter of piston pin ... 119.994 0.006 mm (4.7242 0.0002 inch)Clearance between piston pin and bore in piston ... 0.034 0.014 mm (0.0013 0.0006 inch)