V-BELT 9L1130 - Caterpillar

The Background Information "Background.Dxf" or "*.Avoid.Bg.Dxf" Does Not Overlay the Design Information
Probable Causes
There is a units mismatch between the background file and the AccuGrade system
Design data is in error and does not actually overlay.Problem Isolation
The DXF file format does not contain any information on the units that are used "US Survey Feet" "FT" or "International" feet "ft" or meters "m". Ensure that the units selected for the AccuGrade system are the same as the (implicit) units for the .dxf file.
Ensure that there is not a discrepancy between "US Survey Feet" "FT" and International feet "ft". Although the difference is small, this difference may be significant.The Display Takes a Long Time to Show Design Information, Zoom, Or Pan
Probable Causes
Site Map file may be too large.
Background Plan may be too large
Design data file may be too large.Problem Isolation
The "Site Map" file "site.dxf" is stored in the root directory of the data card. The "Site Map" file is intended to be a low-resolution map of the site extents and major site features. The maximum recommended size of this file is 300 KB.
The "Background Plan" file "*.bg.dxf" is stored in a folder with a design file and is only loaded when that design is loaded. The background file shows any details that are pertinent to that design. The maximum recommended combined size for the "Site Map and Background Plan" files is 1.5 MB. The larger the file size the longer it will take to load, zoom, and pan.Top and Bottom Light Bar LEDs Flash
Probable Causes
The machine is off the design and no design information is available.Problem Isolation
Check the display for the "Off Design" message. Move the machine onto the design.The Machine Icon Does Not Appear On the Display And/Or the Bucket Does Not Appear On the "Cross-Section View"
Probable Causes
Automatic panning (auto pan) was turned off and the machine or bucket icon has moved off the screenProblem Isolation
Make sure that the "Auto Pan" feature is turned on. The "Plan View" and "Cross-section View" each have auto pan settings. The machine icon may be visible while the bucket icon is not, and vice versa.Every Time The Power Is Cycled To The System, The Display Asks If You Want To Upgrade The Display Or Receiver Firmware
Probable Causes
An AccuGrade system upgrade file "*.sg2" is present in the root directory of the data cardProblem Isolation
Ensure that the display upgrade file is removed from the data card after the upgrade is completed.