AVSPARE.COM
parts catalog

VALVE 0005380 - Caterpillar



0005380 VALVE Caterpillar parts VALVE
Rating:
76
Alternative (cross code) number:
CA0005380
000-5380
0005380
Caterpillar 0005380 VALVE
Weight: 5 pounds 2 kg.

Buy VALVE 0005380 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Remove the pin from the top of the blade by using the pin extractor.Note: Keep the pin away from dirt and other foreign material.
Illustration 6 g01027828
Tilt the left side of the blade in order to extract the block.
Illustration 7 g01027871
Fold the outer section of the blade toward the rear of the machine.
Reinsert the two pins and install the retainers in order to lock the pins into position.Note: The O-ring seals must be free of dirt and free of other foreign materials before installation.
Illustration 8 g01027910
Lock the folded section of the blade into position with the M24 bolt and nut.
Illustration 9 g01351770
(4) 224-0160 Plate (5) 207-4111 Hook
Lock the bottom of the blade into the folded position with hook (5) and secure the hook with plate (4) .
Illustration 10 g01028021
Repeat the procedure to move the other section of the blade into the folded position.
In order to fold the blade to the original position, reverse and follow the same procedure.Maintenance Intervals
Refer to table 2 for maintenance intervals for the two foldable blades. Perform the scheduled maintenance at the recommended interval or before the recommended interval. Maintenance intervals may need to be shortened in extreme applications.
Table 2
Maintenance Intervals for the Foldable Blades    
Description     Interval (Service Hours)    
""Replace the O-Ring Seals""     Replace the seals when repair is needed.    
""Lubricate the Pins and Pin Bores""     100    
""Clean the Pins and Pin Bores""     200    Replace the O-Ring Seals
Illustration 11 g01351774
(6) Retainers Remove retainers (6) that are located on the top of the blade and on the bottom of the blade. Then replace the O-ring seal.Lubricate the Pins and Pin Bores
Illustration 12 g01351775
(7) Grease zerksUse grease zerks (7) to properly lubricate the pins and properly lubricate the pin bores.
Illustration 13 g01351778
(8) Grease zerkUse grease zerk (8) to properly lubricate the pin and properly lubricate the pin bore.Note: Use only Cat Multipurpose Grease (MPGL) to lubricate the pins and lubricate the pin bores. MPGL is used for heavily loaded bearings and heavily loaded joints. Cat MPGL is an extreme pressure grease that maximizes the life of Caterpillar equipment. Cat MPGL is National Lubricating Grease Institute (NLGI) No. 2 grade that has operating temperatures of −28 to 149 °C (−18 to 300 °F).Clean the Pins and Pin Bores
Illustration 14 g01351781
(9) Pin bore (10) PinClean pin bore (9) and pin (10) .Note: Use only nonflammable solvent to clean the pins and the pin bores.
Illustration 15 g01351783
(11) Pin Bore (12) PinClean pin bore (11) and pin (12) .Note: Use only Nonflammable solvent to clean the pins and pin bores.


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.