VALVE A. 0054934 - Caterpillar

Illustration 9 g03741147
Disconnect harness assembly (20). Remove clips (19) and (21) .
Illustration 10 g03741151
Remove clips (22), (23), and (24) .
Illustration 11 g03741164
Cab removed for photographic purposes.
Turn the fuel supply to the "OFF" position.
Disconnect hose assembly (25) at the back of the engine cylinder head.
Illustration 12 g03741167
Remove clips (26) and (27) .
Illustration 13 g03741172
Remove clips (28) .
Illustration 14 g03741203
Remove bolt (30). Disconnect hose assembly (29) and duct assembly (31) .
Illustration 15 g03741212
Disconnect hose assemblies (32) .
Illustration 16 g03741865
Cut cable straps (33) and reposition the harness assembly.
Illustration 17 g03741898
Illustration 18 g03741902
Typical Example
Illustration 19 g03741970
Attach Tooling (A), Tooling (B), and Tooling (C) to engine and torque converter (34). The weight of engine and torque converter (34) is approximately 1588 kg (3500 lb). Note: Attach Shackle (Y) at the rear of the engine.
Illustration 20 g03741914
Remove bolts (39) from both sides.
Illustration 21 g03741919
Remove bolts (36) from both sides.
Illustration 22 g03741923
Use Tooling (A), Tooling (B), and Tooling (C) in order to remove engine and torque converter (34). Installation Procedure
Install engine and torque converter (34) in the reverse order of removal.
Tighten bolts (36) to a torque of 270 40 N m (200 30 lb ft).
Tighten bolts (35) to a torque of 520 70 N m (384 52 lb ft).