VALVE-GAS 0692535 - Caterpillar

Illustration 8 g01176592
Remove breather cap (10) .
Disconnect hose assemblies (11) .
Illustration 9 g01176594
Disconnect cable assembly (12) and the mounting hardware.
Illustration 10 g01176595
Disconnect hoses (13) and (14) .
Illustration 11 g01176596
Disconnect cable assemblies (15) and (16) .
Illustration 12 g01176597
Remove nut (17) and cover (18) .
Illustration 13 g01176599
Remove harness assembly (19) from electric starting motor (20) .
Illustration 14 g01176601
Disconnect harness assembly (21) .
Disconnect hose (22) if the machine is equipped with an axle oil cooler.
Illustration 15 g01176602
Disconnect hose assembly (23) .
Illustration 16 g01176603
Fasten Tooling (A) to torque converter (24), as shown. Tooling (A) will be used to support torque converter (24), the transmission, and the output transfer gears when the engine is being removed. The weight of torque converter (24), the transmission, and the output transfer gears is approximately 816 kg (1800 lb).
Illustration 17 g01176604
Remove belt (25) .
Illustration 18 g01176606
Disconnect tube assembly (27) and remove connector (26) if the machine is equipped with an axle oil cooler.
Illustration 19 g01176607
Attach Tooling (B) and a suitable lifting device to engine (28). The weight of engine (28) is approximately 862 kg (1900 lb).
Illustration 20 g01176608
Remove bolts (29) .
Illustration 21 g01176610
Remove bolts (30) from both sides of the engine.
Illustration 22 g01176611
Use Tooling (B) and the suitable lifting device to remove engine (28). The weight of engine (28) is approximately 862 kg (1900 lb).