VALVE, INLET 0947108 - Caterpillar

Illustration 1 g00809198
Note: Assemble this linkage on the machine by rotating the rod end of the saw cylinder and by positioning the grease fitting away from the stick. Coat all the bores for pins with lubricant prior to assembly. (1) Torque for four bolts ... 200 40 N m (150 30 lb ft) (2) 7Y-2349 Pin Diameter after plating ... 69.85 0.04 mm (2.750 .002 inch) (3) Lubricate the sealing lip slightly with the lubricant that is being sealed. (4) 137-2820 Bearing Quantity ... 2 Outside diameter ... 95.18 0.013 mm (3.7472 .0005 inch) Inside diameter ... 80.25 0.02 N m (59.189 .015 lb ft) The depth of the bearing in the bearing bore ... 7.00 0.30 mm (.240 .012 inch) (5) 7Y-2348 Pin Diameter after plating ... 79.85 0.04 mm (3.144 .002 inch)Note: Make sure that the bearings are installed in the bore so that the part numbers of the bearings are facing outward. (6) 143-3841 Bearing Quantity ... 2 Outside diameter ... 95.18 0.013 mm (3.747 .0005 inch) Inside diameter ... 80.25 .087 mm (3.159 .0034 inch) The depth of the bearing in the bearing bore ... 5.0 0.3 mm (.20 .01 inch)