VALVE GP-HYD 1032028 - Caterpillar

Illustration 10 g03444500
(20) "Archive" button
Click "Archive" button (20).
Illustration 11 g03444501
(21) Map archive link
(22) "Done" message
Once the map archive is created, "Done" message (22) displays. Click map archive link (21) to download the backup file. Note: Archive is used to refer to the operations area map file when still stored on the Site Server.Note: Backup is used to refer to the same file once downloaded and exists in a second physical location, that is, USB stick or another computer.Restore An Operations Area Map (From Archive)
Perform the following procedure to restore an archived operations area map to the Site Server.
Open the setup tab of the Command web diagnostics. Reference: For the procedure to access Command web diagnostics, refer to Troubleshooting, Testing and Adjusting, "Web Diagnostics - Access".
Illustration 12 g03444502
(1) "Area Setup" section
(2) Area
(23) "Restore Area" link
Locate "Area Setup" section (1) and select "Restore Area" link (23).
Illustration 13 g03444503
(24) "Force" check box
(25) "Select archived area" drop-down selection box
(26) "Submit" button
(27) "Close" button
Locate the operations area map archive to be restored using "Select archived area" drop-down selection box (25). Click "Submit" button (26) to begin the restore. Note: Archives are sorted by map name, and then by the date the archive was created. A currently installed archive for an operations area map will appear in the installed areas (2) list. If the archive is for an operations area map that is currently installed on the Site Server, then "Force" check box (24) must be enabled. Enabling "Force" check box (24) will confirm that the current map will be overwritten.
Illustration 14 g03444504
(28) "Close" button
(29) "Map restore Successful" message
Once the map archive is restored, "Map restore Successful" message (29) displays. Click "Close" button (28).
Restart the Area Manager. Reference: For the procedure to restart the area manager, refer to Troubleshooting, Testing and Adjusting, "Area Manager - Restart".
Restart MAS software on each operator console that is connected to the network.
Restart the Automation ECM on each machine that is connected to the network. Reference: For the procedure to restart the Automation ECM, refer to Troubleshooting, Testing and Adjusting, "Electronic Control Module (Automation) - Restart".Restore An Operations Area Map (From Backup)
Perform the following procedure to restore a ZIP format operations area map backup file to the Site Server.
Open the setup tab of the Command web diagnostics. Reference: For the procedure to access Command web diagnostics, refer to Troubleshooting, Testing and Adjusting, "Web Diagnostics - Access" .
Illustration 15 g03444505
(1) "Area Setup" section
(2) Area
(3) "Add new area" link
(23) "Restore area" link
Locate "Area Setup" section (1) and select "Add New Area" link (3). Note: Do not select "Restore Area" link (23) when restoring an operations area map backup zip file. "Restore Area" link (23) is only used to restore an operations area map archive. Refer to the procedure "Restore An Operations Area Map (From Archive)" for more information.
Illustration 16 g03444458
(4) "Browse..." button
(5) "Force" check box
(6) "Submit" button
(7) "Close" button
Click the "Browse..." button (4).
Illustration 17 g03444536
(24) ZIP format operations area map backup file
(25) "Open" button
Use the file selection window to select ZIP format operations area map backup file (24). Click