VALVE GP-BRAKE CONTROL 1061774 - Caterpillar

Specifications
Illustration 1 g03408217
Table 1
Specification for 367-4474 Refrigerant Compressor Gp
Item Qty Part Specification Description
1 2 8T-5436 Bolt Torque to 40 5 N m (30 4 lb ft). Removal Procedure
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Recover the refrigerant. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating Systems with R-134a For All Caterpillar Machines" for the recovery and the charging procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.
Illustration 2 g03656622
Remove grill assembly (1).
Illustration 3 g03656628
Remove angle plate (4) and plate (2). Open door (3) and remove plate (5).
Illustration 4 g03656652
Remove belt (6). Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace" to remove and install the belt.
Illustration 5 g03657569
Disconnect harness assembly (7) and remove clips (8).
Illustration 6 g03657645
Remove bolt (11) to disconnect the refrigerant hose assemblies (10) from refrigerant compressor (9).
Illustration 7 g03657676
Remove bolts (13). Remove bolts (12) and remove refrigerant compressor (9). Installation Procedure
Install refrigerant compressor (9) in the reverse order of removal.
Tighten bolts (12) to a torque of 40 5 N m (30 4 lb ft).