VALVE GP-TRANSMISSION CONTROL 1074414 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1 Start By:
Remove the air cleaners. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01428241
Disconnect fitting (2). Position fitting (2) and hose assembly (1) out of the way.
Attach Tooling (A) and a suitable lifting device onto turbocharger (3). The weight of turbocharger (3) is approximately 59 kg (130 lb).
Illustration 2 g01428242
Disconnect clamps (4), (6), and (7).
Remove bolts (5). Remove turbocharger (3).
Illustration 3 g01949854
Remove screen assembly (8) from turbocharger support (10) and inspect. Remove O-ring seal (9).
Repeat Steps 1 through 4 for the remaining turbochargers.