VALVE GP-CONTROL 1077016 - Caterpillar

Illustration 1 g00804185
Note: Do not use handles or steps in order to lift or tie down the machine.
Improper lifting and improper tie-downs can allow the load to shift and cause injury or damage.
The weight and the instructions that are given herein describe the machine as the machine is manufactured by Caterpillar.Refer to the Operation and Maintenance Manual, "Specifications" for specific weight information.
Engage the parking brake.
Use proper rated cables and slings for lifting. The crane should be positioned so that the machine is lifted parallel to the ground. For a machine without a ripper, position the slings beneath the front of the track and beneath the rear of the track. For a machine with a ripper, position the slings beneath the front of the track and under the ripper at the rear of the machine.
On sharp corners, use corner protectors.
To prevent contact with the machine, lifting cables should have sufficient length.
The width of the spreader bar and the strength of the spreader bar should be sufficient to prevent contact with the machine.When the wire cables are lifted the wire cables should slide to front track rollers and to the rear track rollers.