VALVE GP-PILOT 1111529 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
B     1U-7505     Hydraulic Jack     1    
C     1U-9200     Lever Puller Hoist        
140-7742 Sleeve        
D     1U-6221     Hydraulic Torque Wrench Gp     1    
132-8223 Hydraulic Pump and Motor Gp     1    
132-8154 Wrench Link     1    
132-8143 Wrench Link     1    
9U-6539 Socket     1    
214-1126 Socket     1    
E     180-3034     Jack Stand Gp     1    
180-3033 Jack Stand Gp     2    
Illustration 1 g01361675
Install Tooling (C) and a suitable lifting device to winch (6) . The weight of winch (6) is approximately 873 kg (1925 lb).
Position winch (6) on Tooling (E) .
Illustration 2 g01361683
Connect hose assemblies (8) .
Illustration 3 g01361676
Connect harness assemblies (7) .
Illustration 4 g01361674
Use Tooling (D) in order to install bolts (5) .
Remove Tooling (C) and a suitable lifting device to winch (6) .
Illustration 5 g01361673
Use Tooling (B) in order to position bottom guards (2) and (4) . The weight of bottom guards (2) and (4) is approximately 60 kg (132 lb).
Install guard (2) , guard (4) , and bolts (3) .
Illustration 6 g01361672
Install bolts (1) into cover (2) .End By: Fill the hydraulic system oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".