1140508 VALVE & MOUNTING GP Caterpillar parts
322, 322 FM L, 322 LN
Rating:
Alternative (cross code) number:
CA1140508
114-0508
1140508
CA1140508
114-0508
1140508
Weight: 8 pounds 3 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$13,325.80
20 Nov 2017
Panasonic Healthcare Co.: Panasonic Healt
1140508 Fridge Pharmaceutical 12CuFt Beige Ea Panasonic Healthcare Co. -MPR-311DH
Fridge Pharmaceutical 12CuFt Beige Ea
Fridge Pharmaceutical 12CuFt Beige Ea
Number on catalog scheme:
4
For full view, you need register
Information:
(1) Seal(2) Rubber Toric Ring(3) Housing Retaining Lip(4) Housing Ramp(5) Seal Ring Housing
(6) Seal Ring Face(7) Seal Ring Ramp(8) Seal Ring Retaining Lip(9) Installation Tool1. Remove any oil film, dust or other foreign matter from toric rubber rings (2) and from ramps (4) and (7) and lips (3) and (8) of both seal rings (1) and housings (5). Use isopropyl alcohol and clean cloth of paper towels for wiping.
Never permit oil to get on the toric rings or ramps before both seal rings are put together in their final assembled position (Step 10).
Avoid prolonged skin contact with isopropyl alcohol. Avoid breathing the vapors without adequate ventilation and do not smoke. Do not use near open flame or welding operations or other heated surfaces exceeding 482° C (900° F).
2. Put toric ring (2) on seal ring (1), at bottom of seal ring ramp (7) and against retaining lip (8).
Make sure that toric ring (2) is straight on seal ring (1) and is not twisted. Be careful when you work on the rubber toric ring. Nicks, cuts and scratches can cause leaks.
3. Put installation tool (9) onto seal ring (1) with toric ring (2). Lower the rings into a container with isopropyl alcohol until all surfaces of toric ring (2) are wet.
Do not use Stanisol or any other liquid that leaves an oil film or does not evaporate quickly.
4. With all surfaces of toric ring (2) wet, use installation tool (9) to position seal ring (1) and toric ring (2) squarely against housing (5) as shown. Use sudden and even pressure to pop (push) toric ring (2) under retaining lip (3) of housing (5). 5. Check assembled height (A) in at least four places, 90 degrees apart. This difference in height around the ring must not be more than 1 mm (.04"). 6. If small adjustments are necessary, do not push directly on seal ring (1); use installation tool (9).7. Toric ring (2) can twist if it is not wet all around during installation or if there are burrs or fins on retaining lip (3) of housing (5).
Misalignment, twists and bulges of the toric ring will cause Duo-Cone Seal failures. If correct installation is not obvious, remove seal from housing and repeat steps 3 thru 6.
IMPORTANT: Toric rings (2) must never slip on the ramps of either seal rings (1) or seal ring housings (5). To prevent slippage, wait a minimum of two minuets to let the isopropyl alcohol evaporate before further assembly. Once correctly in place, the toric ring must roll on the ramps only. 8. Wipe seal faces (6) of seal rings (1) clean. Use a lint free cloth or paper towel. No particles of any kind are permissible on the sealing surfaces. Even a small piece from a paper towel can hold the seal faces apart and cause leakage. 9. Put a thin film of clean oil on the seal faces. Use an applicator, a disposable tissue or a clean finger to distribute the oil evenly. Be
Caterpillar SIS machinery equipment:
Caterpillar SIS
322L EXCAVATOR 9RL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-0508
VALVE & MOUNTING GP
322 L, 322 LN AND 322 N EXCAVATORS 4RM00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-0508
VALVE & MOUNTING GP
322 322L TRACK-TYPE EXCAVATORS 7WL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
114-0508
VALVE & MTG GP
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
320, 320 L, 320B L, 320N, 322, 322 FM L, 325, 325 FM L, 325 L, 325 LN, 330, 330 FM L, 330 L
320, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, M325B
320, 320 L, 320B, 320B L, 320B U, 320N, 321B, 322, 322 FM L, 322B, 322B L, 325, 325 FM L, 325 L, 325 LN, 325B, 330, 330 FM L, 330 L, 330B, 345B, 345B II, 345B L, 345C, 933, 939, D3C III, D4C III, D5C ...
318C, 320C, 320C FM, 320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 322 FM L, 322C, 323D L, 324D, 324D L, 325 FM L, 325 L, 325C, 329D, 329D L, 330, 330 FM L, 330 L, 330C, 330C L, 3...
320, 320 L, 320N, 322, 325, 325 L, 325 LN, 330, 330 FM L, 330 L
320, 320 L, 320N, 322, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, M325B
307, 311, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 320N, 322, 322 FM L, 322 LN, 322B LN, 322C, 325, 325B L, 330, 330 L, 330B L, 345B II, 345B L, 350, 375, 375 L
16G, 16H NA, 245, 245B, 307, 311, 3116, 312, 3126, 3126B, 3126E, 312D, 312D L, 314D CR, 314D LCR, 315, 317, 3176, 3176B, 3176C, 318D L, 3196, 320 L, 3208, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 320B, 322 FM L, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 205B, 214B, 2...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 224...
120G, 120H, 12G, 12H, 12H NA, 130G, 135H, 140G, 140H, 140H NA, 14G, 160G, 160H, 160H NA, 16G, 215, 215C, 215D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 307, 307B, 312, 312B L...
2393698
VALVE GP-MAIN CONTROL
365C, 365C L, 365C L MH
365C, 365C L, 365C L MH
2802630
VALVE & LINES GP-GRAPPLE
525C, 535C
525C, 535C
2726952
VALVE GP-LUBE DISTRIBUTION
735, 740
735, 740
1907703
VALVE GP-CONTROL
320C, 330C, 330C L
320C, 330C, 330C L
9T7174
VALVE GP
416, 426, 428
416, 426, 428
2705677
VALVE & MTG GP-CONTROL
321D LCR, 323D L, 323D LN, 323D SA, 325D L, 330D L, 336D L
321D LCR, 323D L, 323D LN, 323D SA, 325D L, 330D L, 336D L
9T0627
VALVE GP
416, 426, 428
416, 426, 428
3218824
VALVE GP-LUBE DISTRIBUTION
735, 735B, 740, 740B
735, 735B, 740, 740B
6E5788
VALVE GP-CONTROL
350, 375, 375 L, 5130
350, 375, 375 L, 5130