VALVE GP-LOAD CONTROL 1176383 - Caterpillar

Table 1
New Part Number    Description    Model Usage    Former Part Number    
313-9312     Bracket As     950H through 972H, IT62H     260-9984    
314-2532     Bracket As     950H through 972H, IT62H     260-9985    
320-9867     Bracket As     938H and IT38H     265-3145    
320-9868     Bracket As     938H and IT38H     265-1048    
344-3455     Signal and Lamp Group     Lamp Group (RH)     105-4849    
344-3456     Signal and Lamp Group     Lamp Group (LH)     105-4850    
Illustration 1 g01955057
Current Design
Illustration 2 g01955058
New DesignThe new design is adaptable to the following machines:
950H (S/N: K5K1-2526; M1G1-1782; N1A1-3228)
962H (S/N: K6K1-403; M3G1-541; N4A1-1261)
966H (S/N: A6D1-2132; A6G1-3944)
972H (S/N: A7D1-764; A7G1-1276; WLA1-9)
IT62H (S/N: M5G1-475)
IT38H (S/N: JNJ1-UP)
938H (S/N: LKM1-568; MJC1-639)Note: Field installation on the 938H will require the addition of two 090-8247 Blocks. Install one on the right-hand side and one on the left-hand side of the machine. Refer to Illustration 3 below.
Illustration 3 g02369381
090-8247 Block placement. Secure with a 3 mm (0.12 inch) fillet weld all aroundThe new design is effective in production on the following machines:
950H (S/N: K5K2527-UP; M1G1783-UP; N1A3229-UP)
962H (S/N: K6K404-UP; M3G542-UP; N4A1262-UP)
966H (S/N: A6D2133-UP; A6G3945-UP)
972H (S/N: A7D765-UP; A7G1277-UP; WLA10-UP)
IT62H (S/N: M5G476-UP)
938H (S/N: LKM569; MJC640-UP)Note: The new design will be effective in Piracicaba for the 938H in August 2009.