VALVE-THERMAL COMPENSATOR 1182460 - Caterpillar

Unexpected machine movement can cause injury or death.In order to avoid possible machine movement, move the hydraulic lockout control to the LOCKED position and attach a Special Instruction, SEHS7332, "Do Not Operate" or similar warning tag to the hydraulic lockout control.
When maintenance or servicing of the rear view camera is required follow these steps.
Park the machine on a level surface, and apply parking brake.
Place the work tool on the level surface.
Move the hydraulic lockout control to the Locked position.
Turn the engine start switch to the OFF position and remove the engine start switch key.
Turn the battery disconnect switch to the OFF position and remove the battery disconnect switch key.Clean Camera Lens
If necessary, clean the camera lens before you operate the machine. Use a soft cloth for cleaning.Adjust the Area of Visibility
If the camera displays an undesired view, adjust the area of the visibility.
Illustration 1 g06345886
(1) Bolt
Remove bolts (1) and the camera cover
Illustration 2 g06345908
Loosen the 2 M3 hex head bolts (1) to allow the camera to be adjusted.
Illustration 3 g06342012
Adjust the area of visibility of the camera so the rear edge of both tracks can be seen.
Tighten the 2 bolts (1) to a torque of 1.1 0.1 N m (9 1 in-lb).
Reinstall camera cover. Ensure that camera view is not obstructed by cover.