VALVE GP-BANK- 1210456 - Caterpillar

Illustration 1 g03380814
(1) Keypad guidance area
(2) Back Button
(3) "OK" Button
(4) Left key
(5) Up key
(6) Down key
(7) Right key The Calibrations menu option is entered by selecting "Calibrations" from the Service menu. To select this option, press the Up key (5) or the Down key (6) until "Calibrations" is highlighted. Then press the "OK" button (3).Note: Refer to Systems Operation, "Service Menu" for instructions on navigating to the Service menu.The following is a list of calibrations that can be performed with the monitoring system:Note: All of the warnings that are listed may not be applicable to all machine models.
Power Shift Pressure
Swash Plate
Modulation Inputs
Bypass Cut Valves
Attachment Valves
Pilot Pressure Limit Solenoid
Variable Relief Valves
Main Pump Flow Limit
Boom Down Regen Valve
Front Linkage Position Sensor