VALVE GP-PILOT 1226348 - Caterpillar

Rotation is counterclockwise when seen from the drive end.Type of pump ... variable displacement pistonDisplacement ... 98 cm3/rev (6.1 in3/rev)Case pressure ... 280 kPa (40 psi)Maximum case pressure ... 520 kPa (75 psi)Pressure limiting setting ... 45 000 kPa (6530 psi)For test use SAE 10 oil at 65°C (150°F)Test at Full SpeedOutput ... 120.4 liter/min (31.8 U.S. gpm) At a pressure of ... 690 kPa (100 psi)With pump at ... 2420 rpmWith engine at ... 2200 rpmOutput ... 119.6 liter/min (31.6 U.S. gpm) At a pressure of ... 690 kPa (100 psi)With pump at ... 2420 rpmWith engine at ... 2200 rpm
Propel Pump Cross Section(1) Tighten four bolts to a torque of ... 75 N m (55 lb ft)(2) Tighten filter adapter to a torque of ... 120 N m (90 lb ft)(3) Tighten multi-function valve to a torque of ... 90 N m (65 lb ft)(4) Tighten 12 bolts to a torque of ... 14 N m (10 lb ft)(5) Tighten six bolts to a torque of ... 16 N m (12 lb ft)(6) Tighten four bolts to a torque of ... 5 N m (48 lb in)(7) Type of charge pump ... gerotorDisplacement of charge pump ... 20cm3/rev (1.21 in3/rev)Charge pressure ... 2400 kPa (350 psi)(8) Tighten locknut to a torque of ... 46 to 56 N m (34 to 42 lb ft)(9) Tighten two bolts to a torque of ... 14 N m (10 lb ft)(10) Tighten six bolts to a torque of ... 14 N m (10 lb ft)(11) Tighten four bolts to a torque of ... 14 N m (10 lb ft)(12) Tighten two bolts in thru holes to a torque of ... 25 N m (18 lb ft) Tighten four bolts in blind holes to a torque of ... 32 N m (24 lb ft)(13) Tighten two bolts to a torque of ... 23 N m (17 lb ft)