1269400 VALVE GP-PUMP CONTROL Caterpillar parts
D250E, D300E
Rating:
Alternative (cross code) number:
CA1269400
126-9400
1269400
CA1269400
126-9400
1269400
Weight: 2 pounds 1 kg.
ARTICULATED TRUCK,
This part in 2 request:
Show.
This information for suppliers only!
2019-09-07
2016-06-14
Information:
Removal Procedure
Start By:
Remove the cab.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hot oil spray.Make sure all attachments have been lowered, oil is cool and the pressure has been released from the hydraulic system before removing any components or lines.Be sure there is no pressure in the tubing before it is disconnected from the fitting.Do not allow hot oil or components to contact skin.
Illustration 1 g03362259
Disconnect hose assembly (1).
Disconnect harness assembly (2).
Remove two bolts (4) (not shown) and remove modulating valve (3), the orifice plate, and the gasket.
Illustration 2 g03362312
Remove seal (5) from modulating valve (3).
Illustration 3 g03362319
Remove nut (6) and coil assembly (7).
Illustration 4 g01145640
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove cartridge assembly (8) from valve body (9).
Illustration 5 g01145641
Remove O-ring seals (10) from cartridge assembly (8).
Illustration 6 g03362296
Remove spool assembly (11) and spring (12) from valve body (9).
Remove fitting (13).
Repeat this procedure for the remaining modulating valves. Installation Procedure
Install modulating valve (3) in the reverse order of removal.
Tighten fitting (13) to a torque of 14 4 N m (124 35 lb in).
Tighten nut (6) to a torque of 13.0 1.5 N m (115.06 13.28 lb in).
Start By:
Remove the cab.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hot oil spray.Make sure all attachments have been lowered, oil is cool and the pressure has been released from the hydraulic system before removing any components or lines.Be sure there is no pressure in the tubing before it is disconnected from the fitting.Do not allow hot oil or components to contact skin.
Illustration 1 g03362259
Disconnect hose assembly (1).
Disconnect harness assembly (2).
Remove two bolts (4) (not shown) and remove modulating valve (3), the orifice plate, and the gasket.
Illustration 2 g03362312
Remove seal (5) from modulating valve (3).
Illustration 3 g03362319
Remove nut (6) and coil assembly (7).
Illustration 4 g01145640
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove cartridge assembly (8) from valve body (9).
Illustration 5 g01145641
Remove O-ring seals (10) from cartridge assembly (8).
Illustration 6 g03362296
Remove spool assembly (11) and spring (12) from valve body (9).
Remove fitting (13).
Repeat this procedure for the remaining modulating valves. Installation Procedure
Install modulating valve (3) in the reverse order of removal.
Tighten fitting (13) to a torque of 14 4 N m (124 35 lb in).
Tighten nut (6) to a torque of 13.0 1.5 N m (115.06 13.28 lb in).
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1528340
VALVE GP-SOLENOID
1090, 1190, 1190T, 1290T, 1390, 140G, 320B, 322B, 322B L, 325B, 330B, 345B II, 350, 375, 511, 515, 521, 522, 525, 525B, 532, 541, 550, 550B, 551, 552, 554, 560B, 570, 570B, 574, 580, 580B, 583T, 587T,...
1090, 1190, 1190T, 1290T, 1390, 140G, 320B, 322B, 322B L, 325B, 330B, 345B II, 350, 375, 511, 515, 521, 522, 525, 525B, 532, 541, 550, 550B, 551, 552, 554, 560B, 570, 570B, 574, 580, 580B, 583T, 587T,...
1938559
VALVE GP-SOLENOID
30/30, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 735, 740, 769D, 770, 771D, 772, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785B, 785C, 785D, 789B, 789C, 79...
30/30, 621F, 621G, 623E, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 735, 740, 769D, 770, 771D, 772, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785B, 785C, 785D, 789B, 789C, 79...
7E5346
VALVE AS
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 224...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 224...
1007860
VALVE-INLET
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 350, 515, 517, ...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 350, 515, 517, ...
1487455
VALVE-EXHAUST
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 350, 515, 517, 518C, 5...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 350, 515, 517, 518C, 5...
8N4485
VALVE AS-VENT
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H NA, 1673C, 215, 225, 235, 235B, 3116, 3176, ...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 140M, 140M 2, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 160M, 160M 2, 163H NA, 1673C, 215, 225, 235, 235B, 3116, 3176, ...
8C3446
VALVE-FLUID SAMPLING
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
4P3546
VALVE AS-RELIEF
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 35...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 35...
8N2505
VALVE-GOVERNOR SERVO
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215, 225, 229, 235, 235B, 245, 3204, 330, 330 FM L, 330 L, 33...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215, 225, 229, 235, 235B, 245, 3204, 330, 330 FM L, 330 L, 33...
1W6987
VALVE AS-CHECK
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 235B, 235C, 3204, 3208, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 235B, 235C, 3204, 3208, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306...
7E2464
VALVE AS-CHECK
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B...
3E4058
VALVE AS
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
6E4703
VALVE GP-RELIEF
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
2570267
VALVE GP-SOLENOID
725, 730, 950H, 962H, 966H, D8T, D9T, IT62H
725, 730, 950H, 962H, 966H, D8T, D9T, IT62H
7X2249
VALVE AS-BRAKE
AP-1000, AP-1050, AP-200B, AP-800
AP-1000, AP-1050, AP-200B, AP-800
1068238
VALVE MECHANISM GP
315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
315, 315B, 315B FM L, 315C, 317B LN, 318B, 933, 933C, 939, 939C, D3C III, D3G, D4C III, D4G, D5C III, D5G
9T8489
VALVE GP-CONTROL
966D, 966F, 966F II
966D, 966F, 966F II
1588076
VALVE & MTG GP-BRAKE
D6R II, D7R II, D8R II
D6R II, D7R II, D8R II
4212717
VALVE & MOUNTING GP
303.5E, 304E, 305.5E, 305E
303.5E, 304E, 305.5E, 305E
1644216
VALVE GP-RETARDER HYD CONTROL
621F, 621G, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G
621F, 621G, 623F, 623G, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 657G
1008941
VALVE GP-BRAKE CONTROL
515, 525, 814F, 815F, 816F, 824G, 825G, 826G, 844, 854G, 950F, 950F II, 960F, 966F, 966F II, 970F, 980G, 988F, 988F II, 990, 990 II, 992D, 992G
515, 525, 814F, 815F, 816F, 824G, 825G, 826G, 844, 854G, 950F, 950F II, 960F, 966F, 966F II, 970F, 980G, 988F, 988F II, 990, 990 II, 992D, 992G
9T6697
VALVE GP-CONTROL
30/30, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D5M, DEUCE
30/30, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D5M, DEUCE
2179696
VALVE & LINES GP-TRAVEL CONT
1090, 1190, 2290, 2390, 511, 521, TK711, TK721
1090, 1190, 2290, 2390, 511, 521, TK711, TK721
6E0171
VALVE GP-RELIEF
215D, 219D
215D, 219D