VALVE GP-BANK 4 1333825 - Caterpillar

Diesel engine exhaust contains products of combustion which may be harmful to your health. Always start and operate the engine in a well-ventilated area and, if in an enclosed area, vent the exhaust to the outside.
Mounting The Machine
* Mount the machine only where steps and/or handholds are provided.* Inspect, and when necessary, clean and have repairs made to steps and handholds before mounting.* Face the machine when mounting. * Maintain a three-point contact (two feet and one hand or one foot and two hands contact) with the steps and handholds.Machine Walk-Around Inspection
For maximum service life of the machine, make a thorough walk-around inspection before mounting the machine to start the engine.Look around and under the machine for loose bolts, trash build-up, oil or coolant leaks and broken or worn parts.Check all of the oil, water, coolant and fuel levels.Refer to Every 10 Service Hours or Daily in the Maintenance Section of this manual for more detailed information.Refer to Walk-Around Inspection in the Maintenance Section of this manual for detailed walk-around inspection information.Seat and Seat Belt Checks
Adjust the seat at the beginning of each shift or when changing operators. Adjust the seat so controls can be reached when the operator's back is against the seat back.Lock the seat in position before operating the machine to prevent unexpected seat movement. Make sure the operator's platform is secured with bolts before operating the machine to prevent unexpected platform movement.Inspect the seat belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Fasten the seat belt before starting the engine.Refer to Seat Adjustment and Seat Belt in the Monitoring Systems and Operator Station Features portion of this manual for more detailed information.