VALVE GP-MAIN CONTROL 1334234 - Caterpillar

(1) Tighten three bolts to a torque of ... 34 N m (25 lb ft) Apply 9S3263 Thread Lock to bolt threads.(2) Vibratory frequency sensor: Apply 9S3263 Thread Lock to the threads of the pickup. Install pickup to get a clearance between pickup and plate (A) of ... 0.76 to 1.52 mm (.030 to .060 in.) Turn pickup until contact is made with plate (A) and back out 3/4 of a turn.(3) Apply 9S3263 Thread Lock to bolt threads. Tighten bolt to a torque of ... 100 N m (74 lb ft)(4) Apply 9S3263 Thread Lock to bolt threads. Tighten bolt to a torque of ... 100 N m (74 lb ft)(5) Apply 9S3263 Thread Lock to bolt threads. Tighten bolt to a torque of ... 370 N m (275 lb ft)Tighten jam nut to a torque of ... 200 N m (148 lb ft)Vibrator Shaft And Eccentric Mass
(6) Apply 9S3263 Thread Lock to shaft and threads. Tighten nut to a torque of ... 40 N m (30 lb ft)(7) Apply 9S3263 Thread Lock to bolt threads and, tighten bolt to a torque of ... 22 N m (16 lb ft)(8) Apply 9S3263 Thread Lock to bolt threads and, tighten torque to ... 60 N m (45 lb ft)(9) Apply 9S3263 Thread Lock to bolt threads and torque to ... 22 N m (16 lb ft)(10) Apply 9S3263 Thread Lock to shaft threads and install nut.(11) Oil level sight gauge: Position sight gauge at lowest position and fill with the correct oil to the center of gauge.(12) Apply 9S3263 Thread Lock to bolt threads and torque to ... 28 N m (21 lb ft) Assemble shaft (B) and weight (C) with "T" marks in alignment. Install weight (C) with eccentric down and "T" marks on shaft up as shown in view A-A. Install shift shaft (F) with the keyway positioned up. Install sleeve (D) even with chamfer on shaft. Install the seal in the housing to dimension (E) 4.83 0.76 mm (.190 .030 in).