VALVE 1421412 - Caterpillar

Illustration 1 g02158347
Illustration 2 g03380058
(1) Home key
(2) Back key
(3) "OK" key
(4) Left key
(5) Up key
(6) Down key
(7) Right key From the Main menu, use the appropriate Up key (5) or Down key (6) to highlight the "Display Settings" menu. Then press the "OK" key (3) to allow access to the following parameters:
Clock Adjust
Brightness Adjust
Display Unit Select
Default Setting (if equipped with camera)Clock Adjust
From the "Display Settings" menu, use the appropriate Up key (5) or Down key (6) to highlight the "Clock Adjust" menu. Then press the "OK" key (3). This operation will allow clock adjustment. Use the Left key (4) or Right key (7) to highlight hours or minutes. The Up key (5) or Down key (6) can be used for adjustment. Press the "OK" key (3) to save settings.
Illustration 3 g02158369Brightness Adjust
From the "Display Settings" menu, use the appropriate Up key (5) or Down key (6) to highlight the "Brightness Adjust" menu. Next, press the "OK" key (3). This operation will allow access to the brightness adjustment. Brightness is adjusted by using the Up key (5) or Down key (6) to highlight the selection. The Left key (4) or Right key (7) can then be used for adjustment. Press the "OK" key (3) to save settings.
Illustration 4 g02158379Display Unit Select
From the "Display Settings" menu, use the appropriate Up key (5) or Down key (6) to highlight the "Display Unit Select" menu. Press the "OK" key (3). This operation will allow access to the "Unit Select" screen. Selection can be made using the Up key (5) or Down key (6). Selection is saved by pressing the "OK" key (3).
Illustration 5 g03380925Default Screen Preset
The "Default Screen Preset" menu allows the operator to change the default screen image when the monitor is turned on.
Illustration 6 g02432196Note: This menu function is only available when the machine is equipped with a rear-view camera.
Illustration 7 g02773282
(Pattern A) Camera view is not displayed. Gauges are displayed in large view.
(Pattern B) Gauges and camera view are displayed simultaneously. Pattern B is the default display if the rear view camera is equipped on the machine.
(Pattern C) Gauges are not displayed. Large view of rear view camera.
(Pattern D) Camera view displayed on full monitor screen. Any warnings or events will default to Pattern B.
Press any of the arrow keys to highlight the "Default Screen Setting" menu. Press the "OK" key.
Press the Up arrow key or the Down arrow key to select the default screen type. Press the "OK" key to enter the edit mode. Note: Default screen #1 is preset at the factory and cannot be changed for the factory equipped rear camera. This default screen can be changed for other camera modes.
Press the Up arrow key or the Down arrow key to select the default screen type. Press the "OK" key to highlight the default screen type. Press the Up arrow key or the Down arrow key to set the display pattern. Note: Press the "Monitor View" key (8) to preview the selected default screen.
Illustration 8 g03379438
(8) "Monitor View" key
Press the "OK" key (3) to