VALVE GP-SOLENOID 1446292 - Caterpillar

Liter Family (3114, 3116) Of EnginesSUPPLEMENT: 03/00/90ENGINE NEWS, MAY 1989, PAGE 9, "New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves" on 1.1 Liter Family (3114, 3116) Of Engines.The new spring retainers and the interim 9Y7355 Seats are also effective with 3114 (1ZG431) and 3116 (4PG581) Industrial Engines. The new seals are also effective with 3114 (1ZG433) and 3116 (4PG588) Industrial Engines.
--------------- END SUPPLEMENT ---------------SUPPLEMENT: 10/00/89ENGINE NEWS, MAY 1989, PAGE 9, "New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves" on 1.1 Liter Family Of Engines.Under the topic "Adaptable To", add the following serial numbers for the interim engines: 3114 Industrial Engine: 1ZG4313116 Industrial Engine: 4PG581
Add the following serial numbers for the new seals in the second list: 3114 Industrial Engine: 1ZG4333116 Industrial Engine: 4PG588
--------------- END SUPPLEMENT ---------------SUPPLEMENT: 06/00/89ENGINE NEWS, MAY 1989, PAGE 9, "New Valve Stem Seal Used On Inlet Valves And Added To Exhaust Valves" in 1.1 Liter Family Of Engines.Refer to Page 10, under the topic, "Installing The New Seals". The last sentence in the third paragraph should read: "Turning the crankshaft 180° counterclockwise (CCW) moves pistons 2 and 3 to TDC."
--------------- END SUPPLEMENT ---------------Description of Change: A new valve stem seal is used on the inlet and exhaust valves in the 1.1 Liter Family of Engines. (Formerly, a seal was not used on the exhaust valve stem.) The valve spring sits on top of the new seal flange, and this requires a different spring retainer to maintain the same compressed spring length. See Illustration 1.
Illustration 1. The new valve stem seal assemblies with the new spring retainers now used on the inlet and exhaust valves.The former seal formed only an "umbrella" over the end of the valve stem guide. The former seal was not retained and thus it could slide up and down with the valve and become ineffective. The new seal seats directly on the head, and is held in this position by the force of the valve spring.
As an interim change, the new spring retainer was used with the FORMER seal. Since the new retainer was designed for use with the new seal that has a flange under the spring, a 9Y7355 Seat (Spacer) is required to maintain the same compressed spring length on these interim engines. See Illustration 2.
Illustration 2. The interim change where the new retainers are used with the separate spring seats on both valves, but the former seal was still used only on the inlet valve as shown.Adaptable To: The new spring retainers and the interim 9Y7355 Seats are effective with: (interim engines) 3114 Ind. Engine: 5EF482, 1ZG (not available)3114 Standby Generator Set Engine: 6AF4703114 Generator Set Engine: 5JG4733116 Ind. Engine: 2WG546, 4PG (not available)3116 Standby Generator Set Engine: 2SG6433116 Generator Set Engine: 1NJ576The new seals are effective with:
3114 Ind. Engine: 5EF617, 1ZG (not available)3114 Standby Generator Set Engine: 6AF5283114 Generator Set Engine: 5JG6453116 Ind. Engine: 2WG766, 4PG (not available)3116 Standby Generator Set Engine: 2SG7813116 Generator Set Engine: 1NJ790On the