1476937 VALVE GP-CONTROL Caterpillar parts
AP-900B, CP-433E, CS-423E, CS-531D, CS-533D, CS-563D, CS-573D, CS-583D, CS-663E, CS-683E
Rating:
Alternative (cross code) number:
CA1476937
147-6937
1476937
CA1476937
147-6937
1476937
Weight: 1 pounds 0 kg.
ASPHALT PAVER, VIBRATORY COMPACTOR,
Compatible equipment models: 1476937:
Number on catalog scheme:
1
For full view, you need register
Information:
Probable Causes
Leaking injector sleeve and/or damaged sealRecommended Actions
Complete the procedure in the order in which the steps are listed.
Table 1
Troubleshooting Test Steps Values Results
1. Leaking injector sleeve and/or damaged seal
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head.
Refer to the Disassembly and Assembly manual for details.
Do not allow the pressure on the cooling system to exceed
103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector Sleeve
Result: The injector sleeve is leaking.
Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Do not crank the engine if a cylinder is full of fluid. Catastrophic damage can occur to the engine.
Evacuate all cylinders of fluid before trying to start the engine.
Leaking injector sleeve and/or damaged sealRecommended Actions
Complete the procedure in the order in which the steps are listed.
Table 1
Troubleshooting Test Steps Values Results
1. Leaking injector sleeve and/or damaged seal
A. Remove the valve mechanism covers.
B. Remove the fuel injectors from the cylinder head.
Refer to the Disassembly and Assembly manual for details.
Do not allow the pressure on the cooling system to exceed
103 kPa (15 psi) during the test. Damage to the cooling system may result from applying excessive pressure.
C. Pressurize the cooling system in order to identify the injector sleeve that is leaking. Closely inspect the sealing joint around the top of the injector sleeve. Small amounts of coolant will be dripping from the injector sleeve that is leaking.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Injector Sleeve
Result: The injector sleeve is leaking.
Remove the injector sleeve that is leaking. Carefully inspect the sleeve for damage. If there are visible signs of damage to the injector sleeve, replace the sleeve. Replace the O-ring seals for the injector sleeve and reinstall the sleeve. Replace any damaged components.
Coolant may also be contaminating the fuel system. After the engine is shut down, the retention of pressure in the cooling system may cause the transfer of coolant into the fuel system. Visually inspect the fuel tank for coolant. The contamination of coolant in the fuel system may damage injectors and other fuel system components. Ensure that all of the fuel system components are in good repair prior to returning the engine to service.
Do not crank the engine if a cylinder is full of fluid. Catastrophic damage can occur to the engine.
Evacuate all cylinders of fluid before trying to start the engine.
Caterpillar SIS machinery equipment:
Caterpillar SIS
CS-563D CP-563D Vibratory Compactors 9MW00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-563D Compactor-Military 1SZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CP-563D CS-563D Vibratory Compactors 2RZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-583D Vibratory Compactor 2CZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-583D Vibratory Compactor 3GZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-531D Vibratory Compactor 3AZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-531D Vibratory Compactor 4MZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CP-533D CS-533D Vibratory Compactor 5CZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
Caterpillar AP-900B Barber Greene BG-240C Asphalt Pavers AGJ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-533D, CP-533D Vibratory Compactor AET00001-UP (MACHINE) POWERED BY G3116 Engine »
147-6937
VALVE GP-CONTROL
CS-531D Vibratory Compactor AGH00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CP-663E CS-663E Vibratory Compactor AEF00001-UP (MACHINE) POWERED BY 3056 Engine »
147-6937
VALVE GP-CONTROL
CS-683E Vibratory Compactor AGR00001-UP (MACHINE) POWERED BY 3056 Engine »
147-6937
VALVE GP-CONTROL
CS-573D Vibratory Compactor 2YZ00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-573D Vibratory Compactor CMK00001-UP (MACHINE) POWERED BY 3116 Engine »
147-6937
VALVE GP-CONTROL
CS-423E Vibratory Compactor CFX00001-UP (MACHINE) POWERED BY 3054B Engine »
147-6937
VALVE GP-CONTROL
CS-433E,CP-433E Vibratory Compactor CFK00001-UP (MACHINE) POWERED BY 3054 Engine »
147-6937
VALVE GP-CONTROL
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
3054, 3054B, 3056, 3056E, 312C, 550B, 554, 560B, 564, 574B, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-760, BG-225B, BG-225C, CB-534C, CB-535B, CP-433C, CP-433E, CP-573E, CP-663E, CS-431C, CS-433C, CS-56...
3054, 3056, 3056E, 312B L, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, BB-760, CB-434C, CP-573E, CP-663E, CS...
3054, 3056, 312B L, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 908, 924G, 924GZ, CB-434C, CS-323C, CS-663E, CS-683E, PS-150B
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 928G, 938F, 938G, 950F...
3054B, 416D, 424D, CS-423E, TH210, TH215
3054B, 416D, 424D, CS-423E, TH210, TH215
3054, 3054B, 3054C, 3056, 315, 317, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 438D, 442D, 442E, 444E, 444F, 908, AP-...
226B, 226B3, 242B, 247B, 257B, 725, 730, 730C, 735, 735B, 740, 740B, 906H, 906H2, 907H, 907H2, 908H, 908H2, AP-1000B, AP-1055B, AP-655C, AP-900B, BG-2455C, BG-245C, D250E II, D300E II, D350E II, D400E...
120K, 120K 2, 120M, 120M 2, 12H, 12K, 12M, 140H, 140K, 140K 2, 140M, 143H, 14H, 14M, 160H, 160K, 160M, 163H, 16H, 16M, 2290, 2390, 2391, 2491, 24M, 2590, 305.5, 306, 307C, 307D, 308C, 308D, 330C, 330C...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 30/30, 518, 518C, 528, 528B, 530B, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789...
3054C, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315B L, 318D2 L, 320D2, 320D2 GC, 320D2 L, 914G, 924G, 924GZ, AP-650B, AP-800D, CB-434C, CP-433E, CP-533E, CS-323C, CS-433E, CS-533E, CS-663E, ...
2497296
VALVE GP-BANK 7
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 160M, 160M 2
120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 160M, 160M 2
1189599
VALVE & MTG GP-RETARDER CONT
D250E, D300E
D250E, D300E
2186613
VALVE & LINES GP-COUPLER
247B, 257B
247B, 257B
1421273
VALVE GP-TIRE
426B, 426C, 438B, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, TH210, TH215
426B, 426C, 438B, 902, 906, 906H, 906H2, 907H, 907H2, 908, 908H, 908H2, TH210, TH215
1095915
VALVE GP-FLUSHING
CP-433C, CS-431C, CS-433C
CP-433C, CS-431C, CS-433C
2792327
VALVE GP-PRESSURE REDUCING
814F, 814F II, 815F, 815F II, 816F, 816F II
814F, 814F II, 815F, 815F II, 816F, 816F II
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
G3516B
8U6558
VALVE GP-MANIFOLD
205B, 206B, 211B, 212B, TK1051
205B, 206B, 211B, 212B, TK1051
980K, 980K HLG
3484580
VALVE GP-CONTROL
450E, 450F
450E, 450F
1279173
VALVE GP-SOLENOID
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C