VALVE & MTG GP-HOIST CONTROL 1527120 - Caterpillar

Table 1
Required Tools    
Tool     Part Number     Description     Qty    
A     1P-7407     Eyebolt     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00709459
Remove bolts and cover (1) from the rear of the machine.
Illustration 2 g00709464
Disconnect two wires (2) from the back up alarm.
Illustration 3 g00709467
Disconnect wire connector (3) .
Attach tool (A). Attach a nylon lifting strap and a suitable lifting device to tool (A). Remove five bolts and cover (4) .
Illustration 4 g00709520
Note: The cylinders have been removed for photographic clarity.
Turn the fuel supply valve (7) to the "closed " position. Disconnect fuel line (6) from valve (7) .
Remove the bolt and clip (8) .
Remove four bolts (5) that hold the fuel tank in place.
Illustration 5 g00709521
Move fuel tank (9) 51 mm (2 inch) away from the cab.
Disconnect fuel return line (10). Remove the fuel tank. The empty weight of the fuel tank is 89 kg (196 lb).