VALVE GP-SOLENOID 1528344 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     9U-7546     Stand     1    
8S-7650 Cylinder As     1    
8S-7610 Base As     1    
4C-5809 Electric Hydraulic Pump Gp     1    
B     1P-1839     Bearing Puller Adapter     1    
5P-8713 Plate     1    
4C-9643 Screw     1    
6V-3175 Double Acting Cylinder     1    
9U-6832 Nut     1    
9U-6600 Hand Hydraulic Pump     1    
C     5P-8713     Plate     1    
4C-9643 Screw     1    
6V-3175 Double Acting Cylinder     1    
9U-6832 Nut     1    
9U-6600 Hand Hydraulic Pump     1    
1P-1836 Bearing Puller Adapter     1    
Illustration 1 g00979537
Illustration 2 g00979800
Use Tooling (B) in order to install inner bearing (8) .
Use Tooling (C) in order to install outer bearing (8) .
Illustration 3 g00979469
Illustration 4 g00979471
Attach a suitable lifting device to track roller frame (5) .
Position track roller frame (5) onto pin (6). The weight of track roller frame (5) is approximately 1043 kg (2300 lb).
Install pin (7) .
Illustration 5 g00979468
Install plate (4) and the bolts.
Illustration 6 g00979466
Position the O-ring seal.
Install cover (3) .
Illustration 7 g00979463
Remove wood blocks underneath the rear of the machine.
Illustration 8 g00979459
Illustration 9 g00979462
Remove Tooling (A) under the rear of the machine.
Remove Tooling (A) under the front frame of the machine.End By: Connect the track. Refer to Disassembly and Assembly, "Track - Seperate".