VALVE GP-SOLENOID 1528384 - Caterpillar

Photos shown are on 3306 engine.1. Remove oil filter (1) with tool (A).2. Remove bolts (5) and remove outlet tube (4) from the oil filter base.3. Remove bolt (3) and clip (2) from the inlet tube.4. Remove bolts (6) and remove inlet tube (7) from the oil filter base.5. Remove four bolts (8) and oil filter base (9) from the engine oil cooler. Install Oil Filter Base
Photos shown are on 3306 engine.1. Make sure O-ring seals (1) are in position in oil filter base.2. Put oil filter base (2) in position and fasten it to the engine oil filter base.3. Put a thin layer of engine oil on the O-ring seal of inlet tube (3) and outlet tube (4).4. Use a new gasket and install inlet tube (3).5. Install clip (5).6. Use a new gasket and install outlet tube (4).7. Put a thin layer of engine oil on gasket seal (6) of the oil filter.8. Install oil filter (7) until the gasket seal (6) makes contact with the oil filter base.9. Tighten the oil filter (7) 3/4 of a turn more with tool (A). Disassemble Oil Filter Base
start by:a) remove oil filter and base1. Remove five plugs (1) from the oil filter base.2. Remove O-ring seals (2).3. Remove bolts (3), washers, cover (4) and gasket.4. Remove spring (6) and plunger (5) from the oil cooler bypass valve of the oil filter base (7).5. Do Steps 3 and 4 for the oil filter bypass valve of the oil filter base (7). Assemble Oil Filter Base
1. Install plunger, spring, gasket, cover (1), washer and bolts for the oil filter bypass valve.2. Install plunger (2) and spring (3) for the oil cooler bypass valve.3. Install gasket, cover (4), washers and bolts for the oil cooler bypass valve.4. Put 5P3413 Pipe Sealant on the threads of the five plugs (6) and install plugs in oil filter base (5).5. Put O-ring seals (7) in position on the oil filter base.end by:a) install oil filter and base