VALVE & LINES GP-STEERING NEUT 1554554 - Caterpillar

BEFORE SERVICING THE MACHINE LOWER ALL EQUIPMENT, STOP ENGINE AND LOCK PARKING BRAKE, UNLESS OTHERWISE SPECIFIED.
Block blade before changing cutting edge or end bits. Use caution when removing radiator cap, drain plugs, grease fittings or pressure taps.To avoid possible weakening of the ROPS (Roll-over Protection Structure), consult a Caterpillar dealer before altering the ROPS in any way. The protection offered by the ROPS will be impaired if it has been subjected to structural damage or has been involved in an overturn incident.Do not attempt adjustments while tractor is moving or the engine running.Wear gloves when handling cable.Use the proper tools. Replace or repair broken or damaged equipment.Wear safety glasses, safety face shield or safety shoes as the job requires.Do not attempt repairs you do not understand.When using pressure air, wear safety face shield and protective clothing. Use 30 PSI (2 kg/cm2) maximum pressure air for cleaning pressure.Store oily rags or other combustible material in a safe place.Operate engine only in well ventilated area.Promote good housekeeping. Keep tools and work area clean.Do not allow unauthorized personnel on tractor when it is being serviced.Do not smoke while refueling. Fumes from fuel and flammable. Attach warning tags to controls while tractor is being serviced. Turn disconnect switch OFF and remove key before servicing electrical system. Read and understand all warning and caution information provided on the tractor. Follow servicing instructions carefully.Do not use cable if it is kinked or frayed.Do not try to work winch over capacity.Whenever draining lubricant extreme caution should be used, lubricant may be hot and can cause personal injury.Do not smoke when observing battery electrolyte level. Batteries give off flammable fumes.Do not allow electrolyte solution to contact skin or eyes. Electrolyte solution is an acid.Attach ground cable last, and remove first, to prevent sparks from occurring near the battery, which could cause battery vapors to explode. Attach ground cable from booster battery to starter ground terminal on machine to be started.Hot hydraulic oil can cause personal injury. Remove hydraulic tank filler cap slowly to relieve tank pressure. Allow oil to cool before draining tank.Hydraulic oil is flammable. Do not weld on pipes or tubes that are filled with oil.Always inspect cooling system with engine stopped. Remove radiator filler cap slowly to relieve pressure. Steam may cause personal injury.Inhibitor contains alkali, avoid contact with skin and eyes.To prevent personal injury always lower all equipment, stop engine, set parking brake and block or restrain machine before servicing it.If engine is not running, do not release emergency or parking brake systems unless machine is blocked or restrained.