1627746 VALVE GP-SOLENOID Caterpillar parts
322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 345C, 568 FM LL, M325C MH
Rating:
Alternative (cross code) number:
CA1627746
162-7746
1627746
CA1627746
162-7746
1627746
Weight: 23 pounds 10 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1627746:
Number on catalog scheme:
18
For full view, you need register
Information:
Installation Procedure For The Cooling System Vent Line Check Valve On 3406 Truck Engines That Are Equipped With A Cooling System Vent Line At The Temperature Regulator Housing. This Is Most Commonly Found On Engines Produced After January 1, 1996.
Personal injury can result from hot coolant, steam, and alkali.
At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with the skin and eyes.
1. Drain the coolant to a level that is below the temperature regulator housing.2. Remove the cooling system vent line and the 1/4" NPT OEM fitting from temperature regulator housing orifice (1).3. Ensure that the 9M-5590 Stainless Steel Ball 7.938 mm (.3125 in) cannot go through the 1/4" NPT OEM fitting. If the ball can pass through the fitting, then install a 006-6586 Hose Fitting (1/4" NPT X 3/8" hose barb) or a 5P-7175 Straight Nipple (1/4" NPT X 3/8" hose barb) or an equivalent fitting.4. Install the 9M-5590 Stainless Steel Ball inside 1/4" NPT Cavity (1) of the temperature regulator housing. At the bottom of the cavity there is a 4.7 mm (.185 in) orifice that will contain the ball.5. Install the 1/4" NPT OEM fitting or the replacement fitting and the vent line.6. Refill the cooling system to the proper level, start the engine, and check for leaks.The 9M-5590 Stainless Steel Ball is now trapped between the temperature regulator housing and the 1/4" NPT fitting to form a check valve.
Installation Procedure For The Cooling System Vent Line Check Valve On 3406 Truck Engines That Are Equipped With A Cooling System Vent Line On The Cylinder Head. This Is Most Commonly Found On Engines produced before December 31, 1995.
Personal injury can result from hot coolant, steam, and alkali.
At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with the skin and eyes.
1. Drain the coolant to a level that is below the top of the cylinder head.2. Remove the cooling system vent line, the 1/4" NPT OEM fitting, and the NPT X 1/2" NPT reducing bushing from cylinder head orifice (2). 3. Install a 173-3200 reducing bushing (1/2" NPT X 1/4" NPT) into the cylinder head in orifice (1).
Personal injury can result from hot coolant, steam, and alkali.
At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with the skin and eyes.
1. Drain the coolant to a level that is below the temperature regulator housing.2. Remove the cooling system vent line and the 1/4" NPT OEM fitting from temperature regulator housing orifice (1).3. Ensure that the 9M-5590 Stainless Steel Ball 7.938 mm (.3125 in) cannot go through the 1/4" NPT OEM fitting. If the ball can pass through the fitting, then install a 006-6586 Hose Fitting (1/4" NPT X 3/8" hose barb) or a 5P-7175 Straight Nipple (1/4" NPT X 3/8" hose barb) or an equivalent fitting.4. Install the 9M-5590 Stainless Steel Ball inside 1/4" NPT Cavity (1) of the temperature regulator housing. At the bottom of the cavity there is a 4.7 mm (.185 in) orifice that will contain the ball.5. Install the 1/4" NPT OEM fitting or the replacement fitting and the vent line.6. Refill the cooling system to the proper level, start the engine, and check for leaks.The 9M-5590 Stainless Steel Ball is now trapped between the temperature regulator housing and the 1/4" NPT fitting to form a check valve.
Installation Procedure For The Cooling System Vent Line Check Valve On 3406 Truck Engines That Are Equipped With A Cooling System Vent Line On The Cylinder Head. This Is Most Commonly Found On Engines produced before December 31, 1995.
Personal injury can result from hot coolant, steam, and alkali.
At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.
Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.
Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.
Cooling System Coolant Additive contains alkali. Avoid contact with the skin and eyes.
1. Drain the coolant to a level that is below the top of the cylinder head.2. Remove the cooling system vent line, the 1/4" NPT OEM fitting, and the NPT X 1/2" NPT reducing bushing from cylinder head orifice (2). 3. Install a 173-3200 reducing bushing (1/2" NPT X 1/4" NPT) into the cylinder head in orifice (1).
Caterpillar SIS machinery equipment:
Caterpillar SIS
558 Log Loader Forest Machine F5L00001-UP (MACHINE) POWERED BY C7.1 Engine »
162-7746
VALVE GP-SOLENOID
568 Log Loader Forest Machine L6800001-UP (MACHINE) POWERED BY C9.3 Engine »
162-7746
VALVE GP-SOLENOID
548 Log Loader WRA00001-UP (MACHINE) POWERED BY Engine C7.1 »
162-7746
VALVE GP-SOLENOID
325B L Excavator 2JR00001-UP (MACHINE) POWERED BY 3116 Engine »
162-7746
VALVE GP-SOLENOID
330B L Excavator 6DR00001-UP (MACHINE) POWERED BY 3306 Engine »
162-7746
VALVE GP-SOLENOID
322B L Excavator 1YS00001-UP (MACHINE) POWERED BY 3116 Engine »
162-7746
VALVE GP-SOLENOID
325C FOREST SWING MACHINES G1L00001-UP (MACHINE) POWERED BY 3126B Engine »
162-7746
VALVE GP-SOLENOID
330C Forest Swing Machines B4N00001-UP (MACHINE) POWERED BY C-9 Engine »
162-7746
VALVE GP-SOLENOID
330C Forest Swing Machines B1K00001-UP (MACHINE) POWERED BY C-9 Engine »
162-7746
VALVE GP-SOLENOID
330C Forest Swing Machine B3M00001-UP (MACHINE) POWERED BY C-9 Engine »
162-7746
VALVE GP-SOLENOID
M325C Material Handler PAN00001-UP (MACHINE) POWERED BY 3126B Engine »
162-7746
VALVE GP-SOLENOID
345C Shovel Logger A3L00001-UP (MACHINE) POWERED BY C13 Engine »
162-7746
VALVE GP-SOLENOID
325D Forest Swing Machine General Forestry Application High Wide Undercarriage C7K00001-UP (MACHINE) POWERED BY C7 Engine »
162-7746
VALVE GP-SOLENOID
325D Forest Swing Machine Butt-N-Top Log Loader High Wide Undercarriage C8L00001-UP (MACHINE) POWERED BY C7 Engine »
162-7746
VALVE GP-SOLENOID
325D Forest Swing Machine Butt-N-Top Log Loader C9M00001-UP (MACHINE) POWERED BY C7 Engine »
162-7746
VALVE GP-SOLENOID
330D Forest Swing Machine L2K00001-UP (MACHINE) POWERED BY C9 Engine »
162-7746
VALVE GP-SOLENOID
330D Forest Swing Machine H3K00001-UP (MACHINE) POWERED BY C9 Engine »
162-7746
VALVE GP-SOLENOID
330D Forest Swing Machine E4K00001-UP (MACHINE) POWERED BY C9 Engine »
162-7746
VALVE GP-SOLENOID
568 Forest Machines BRB00001-UP (MACHINE) POWERED BY C9.3 Engine »
162-7746
VALVE GP-SOLENOID
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 311D LRR, 312D, 315D L, 318C, 319C, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 321C, 321D ...
311B, 311D LRR, 312B, 312B L, 312C L, 312D, 312D L, 315B, 315B FM L, 315B L, 315C, 315D L, 317B LN, 318B, 319D L, 319D LN, 320B, 320B FM LL, 320B L, 320B U, 321B, 322B, 322B L, 322B LN, 322C, 322C FM,...
307D, 308D, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 325B, 325B L, 325C, 325C FM, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330, 330B, 330B L, 330D FM, 345C, 345C ...
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 205B, 214B, 2...
140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 522B, 532, 541, 541 2, 5...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D L, 725, 730, 966H, 972H, C11, C13, C13 XQ350, CX31-C13I, D8N, R1700G, RM-300, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, C13 XQ350, CX31-C13I, D8N, R1600H, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D...
1485612
VALVE & MTG GP-BYPASS
CS-533D, CS-563D, CS-573D, CS-583D
CS-533D, CS-563D, CS-573D, CS-583D
2344541
VALVE GP-RELIEF
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
307, 311B, 312B L, 315B, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B L, 320B U, 321B, 322B, 322B L, 322B LN, 325B, 325B L, 330B, 330B L, 345B, 345B II, 345B II MH, 345B L, 5110B, W330B, W345B II
2705988
VALVE GP-CONTROL
311D LRR, 312D, 312E, 312E L, 314D LCR, 314E CR, 314E LCR
311D LRR, 312D, 312E, 312E L, 314D LCR, 314E CR, 314E LCR
1589100
VALVE GP-PUMP CONTROL
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 5110B, 5230, 5230B, M322C
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 5110B, 5230, 5230B, M322C
9N0487
VALVE MECHANISM GP
225, 227, 229, 3208, 613B, CB-614, CS-551, PS-500
225, 227, 229, 3208, 613B, CB-614, CS-551, PS-500
6P3526
VALVE GP-SHIFT PRESSURE
776, 777
776, 777
3011448
VALVE MECHANISM GP
3044C, C3.4
3044C, C3.4
1261424
VALVE GP-RELIEF
914G, 939C, 963C, CW-14, D4C III, D5C III, IT14G, IT14G2, PF-290B, PS-150B, PS-150C, PS-200B, PS-360B, PS-360C
914G, 939C, 963C, CW-14, D4C III, D5C III, IT14G, IT14G2, PF-290B, PS-150B, PS-150C, PS-200B, PS-360B, PS-360C
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2590, 322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D FM, 330D L, 511, 521, 522, 541, ...
215D, 219D, 320 L, 320B, 320B L, 322 LN, 325 L, 325 LN, 325B, 325B L, 330 L, 350, 350 L, 375, 5080