VALVE GP-CHECK 1711963 - Caterpillar

Illustration 1 g02678338
Bolt tightening sequence for oil filter base
Table 1
Specification for 363-7616 Engine Oil Filter Gp
Item Qty Part Specification Description
1 1 1R-1808 Engine Oil Filter Apply clean lubricating oil to the gasket of the engine oil filter.
- - - Tighten the 209-7291 Oil Filter Base As bolts in a numerical sequence as shown in the Illustration 1 to the standard torque.
Illustration 2 g02678340
Illustration 3 g02678341
Table 2
Specification for 363-7616 Engine Oil Filter Gp
Item Qty Part Specification Description
2 2 242-3864 Spring Length under test force is 43.18 mm (1.700 inch).
Test force is 43.7 N (9.8 lb).
Free length after test is 58.50 0.50 mm (2.303 0.020 inch).
3 1 2P-4304 Hollow Stud Torque to 68 7 N m (50 5 lb ft).
A - - Length for applying red Loctite 271 to the threads of the hollow stud is 10.0 1.5 mm (0.39 0.06 inch).