VALVE GP-SHUTOFF 1716729 - Caterpillar

Diesel engine exhaust contains products of combustion which may be harmful to your healthAlways start and operate the engine in a well-ventilated area and, if in an enclosed area, vent the exhaust to the outside.
Do not crank the engine for more than 30 seconds. Allow the starting motor to cool for two minutes before cranking again.Turbocharger (if equipped) damage can result, if the engine rpm is not kept low until the engine oil light/gauge verifies the oil pressure is sufficient.
Illustration 1 g00923352
Turn the battery disconnect switch to the ON position.
Move transmission control (1) to the NEUTRAL position.
Engage parking brake (2) .
Move joystick (3) to the HOLD position.
Unlock the steering column. Move the steering column to the desired position and lock the steering column.
Partially depress the governor control pedal. Continue to hold the governor control pedal as you crank the engine.
Turn engine start switch key (4) in order to start the engine. Release the engine start switch key when the engine starts. Release the governor control pedal after the engine starts. Note: The coolant temperature switch will find out if the temperature of the engine coolant is below 0 °C (32 °F). If the temperature of the coolant is below this level, the ether starting aid will automatically be injected into the engine.