1718868 VALVE AS-BLOCK Caterpillar parts
773F, 775F, 844, 844H, 854G, 854K, 950G II, 962G II, 966G, 966G II, 972G II, 980G, 980G II, 980H, 988G, 988H, 992K, MH3049
Rating:
Alternative (cross code) number:
CA1718868
171-8868
1718868
CA1718868
171-8868
1718868
Weight: 3 pounds 1 kg.
MATERIAL HANDLER, WHEEL LOADER,
Compatible equipment models: 1718868:
Number on catalog scheme:
1
For full view, you need register
Caterpillar parts catalog:
Information:
Start By:
Lower the front crankcase guard. Refer to Disassembly and Assembly, "Crankcase Guard - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the fuel from the fuel tank. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Illustration 1 g01164061
Remove bolts (1) and cover assembly (2).
Illustration 2 g01164062
Remove bolts (4) and cover (3).
Illustration 3 g01164078
Illustration 4 g01164081
Attach a suitable lifting device to guard assembly (5). The weight of guard assembly (5) is approximately 45 kg (100 lb). Remove bolts (6) and guard assembly (5).
Illustration 5 g01164089
Remove all mounting hardware from harness assembly (7) and disconnect harness assembly (7).
Illustration 6 g01164092
Disconnect hose assemblies (8).
Illustration 7 g01164103
Remove bolts (9).
Illustration 8 g01164122
Illustration 9 g01164118
Remove bolts (10). Install suitable blocking in order to support fender (11). Note: Fender (11) will need to be repositioned as the fuel tank is removed.
Illustration 10 g01164126
Remove bolts (12) (not shown). Remove extension assembly (13).
Illustration 11 g01164158
Illustration 12 g01164159
Illustration 13 g01164162
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (14). The weight of fuel tank (14) is approximately 159 kg (350 lb). Remove bolts (15) and (16). Remove fuel tank (14).
Lower the front crankcase guard. Refer to Disassembly and Assembly, "Crankcase Guard - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Drain the fuel from the fuel tank. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Illustration 1 g01164061
Remove bolts (1) and cover assembly (2).
Illustration 2 g01164062
Remove bolts (4) and cover (3).
Illustration 3 g01164078
Illustration 4 g01164081
Attach a suitable lifting device to guard assembly (5). The weight of guard assembly (5) is approximately 45 kg (100 lb). Remove bolts (6) and guard assembly (5).
Illustration 5 g01164089
Remove all mounting hardware from harness assembly (7) and disconnect harness assembly (7).
Illustration 6 g01164092
Disconnect hose assemblies (8).
Illustration 7 g01164103
Remove bolts (9).
Illustration 8 g01164122
Illustration 9 g01164118
Remove bolts (10). Install suitable blocking in order to support fender (11). Note: Fender (11) will need to be repositioned as the fuel tank is removed.
Illustration 10 g01164126
Remove bolts (12) (not shown). Remove extension assembly (13).
Illustration 11 g01164158
Illustration 12 g01164159
Illustration 13 g01164162
Attach Tooling (A), Tooling (B), and a suitable lifting device to fuel tank (14). The weight of fuel tank (14) is approximately 159 kg (350 lb). Remove bolts (15) and (16). Remove fuel tank (14).
Parts valve Caterpillar catalog:
120M 2, 12M 2, 140M 2, 160M 2, 330D, 589, 824H, 824K, 825K, 826H, 826K, 834G, 834H, 834K, 836H, 836K, 844K, 854K, 973C, 980H, 988H, 988K, 990K, 992K, 993K, D10N, D10R, D10T, D10T2, D6R II, D7R II, D7R...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 5110B, 5130B, 735, 740, 784C, 785C, 785D, 789C, 793C, 793D, 797, 914G, 924F, 9...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 130G, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 160H, 160K, 160M...
533, 543, 69D, 769D, 771D, 773D, 773E, 773F, 775D, 775E, 775F, 776D, 777D, 777F, 789, 789B, 793, 793C, 834G, 834H, 836G, 950G, 966F II, 966G, 972G, 980G, 988F, 988F II, 988G, 988H, 992D, 994, 994D, 99...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 511, 5130B, 521, 522, 5230, 5230B, 532, 541, 551, 552, 657G, 824G II, 824H, 825G II, 825H, 826G II, 826H, 938H, 950H, 962H, 966G, 966G II,...
824G, 825G, 980G
824G, 824G II, 824H, 824K, 980G, 980G II, 980H, 980K, 980K HLG
785C, 785D, 789C, 789D, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 844, 844H, 854G, 854K, 990 II, 990H, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H
834B, 844, 844H, 844K, 980C, 980F, 980F II, 988B, 988F, 988F II, 990, 990 II, 990H, 990K, AD55, AD55B, AD60, R2900G, R3000H, RM-300, RM-350B, RM-500
69D, 769D, 770, 771D, 772, 773D, 773E, 773F, 775D, 775E, 775F, 776C, 777D, 777F, 784B, 784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, ...
772, 772B, 773, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM
769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 776D, 777D, 777F, 777G
1718867
VALVE AS-BLOCK
140M 2, 14M, 160M 2, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 950G II, 962G II, 966G, 966G II, 972G II, 980G, 980G II, 980H, 988G, 988H, 992K
140M 2, 14M, 160M 2, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 950G II, 962G II, 966G, 966G II, 972G II, 980G, 980G II, 980H, 988G, 988H, 992K
2040507
VALVE-TIRE
980G, 980G II
980G, 980G II
1527202
VALVE GP-THERMOSTATIC
834G, 836G, 844, 980G, 988G, 990 II
834G, 836G, 844, 980G, 988G, 990 II
9J8621
VALVE GP
988B, 988F, 988F II
988B, 988F, 988F II
1971563
VALVE AS-VENT
16M, 24H, 24M, 5110B, 854K, 988G, 988H, 988K, 990 II, 990H, 990K, 992G, 992K, 993K
16M, 24H, 24M, 5110B, 854K, 988G, 988H, 988K, 990 II, 990H, 990K, 992G, 992K, 993K
2902694
VALVE-FLOW CONTROL
854K, 988G, 988H, 988K, 990 II, 990H, 992G, 992K, 993K
854K, 988G, 988H, 988K, 990 II, 990H, 992G, 992K, 993K
1958698
VALVE AS-FLOW CONTROL
16M, 24H, 24M, 5110B, 988G, 988H, 990 II, 990K, 992G, 992K
16M, 24H, 24M, 5110B, 988G, 988H, 990 II, 990K, 992G, 992K
1958697
VALVE AS-PRESSURE REDUCING
16M, 24H, 24M, 5110B, 854K, 988G, 988H, 988K, 990 II, 990H, 992G, 992K, 993K
16M, 24H, 24M, 5110B, 854K, 988G, 988H, 988K, 990 II, 990H, 992G, 992K, 993K
1958695
VALVE
24H, 5110B, 988G, 990 II, 992G
24H, 5110B, 988G, 990 II, 992G
1693504
VALVE GP-BRAKE CONTROL
966G, 972G, 972G II
966G, 972G, 972G II