VALVE GP-SOLENOID 1854254 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->(1)Engine Crankcase
1. Measure the oil level with the engine running at low idle. The oil level must be between the ADD and the FULL marks on the dipstick. 2. Add oil if necessary.(2)Fuel Tank
Do not fill the tank to the top. Fuel expands when it gets warm and can overflow.
Fill the fuel tank at the end of the day to drive out moisture laden air. Drain moisture and sediment from the fuel tank at the start of each shift or after the tank has been filled and allowed to stand for 5 or 10 minutes.(3)Radiator
At Operating Temperature, engine coolant is hot and under pressure.Steam can cause personal injury.Check coolant level ONLY when engine is stopped and radiator cap is cool enough to touch with your hand.Remove filler cap slowly to relieve pressure.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Inspect the coolant level. The level must be to the bottom of the filler neck.(4)Clutch Shift Collar
Lubricate 1 fitting.(5)Main Shaft Bearing - Heavy Duty Clutch With Oil Reservoir
1. Measure the oil level with the engine stopped. Maintain the oil level at the FULL mark on the oil level gauge.2. Add oil if necessary.