VALVE GP-GAS CONTROL 1855310 - Caterpillar

1. Remove nuts (2), the lockwashers and the rings that hold fan (blower) switch (4) and air conditioning control switch (1) in cover (3).2. Remove two screws (5) that hold cover (3) in place. 3. Remove the screws, and disconnect the wires from fan (blower) switch (4) and air conditioning control switch (1). Remove the switches from cover (3).Install Fan And Air Conditioning Control Switches
1. Put fan (blower) switch (4) and air conditioning switch (1) in place in cover (3) with the groove (slot) in the switches aligned with the small holes in cover (3).2. Install rings (5), the lockwashers and nuts (2) that hold the switches in place. The tab on rings (5) must be aligned with the small holes in cover (3). 3. Put the wires in their correct location on switches (4) and (1), and install the screws that hold them in place.4. Put cover (3) in position, and install the two screws that hold it in place.