VALVE GP-BANK- 1887470 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1 Start By:
Remove the right side engine panels. Refer to Disassembly and Assembly, "Sound Suppression - Remove and Install". Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Illustration 1 g01432036
Install Tooling (A) onto the hydraulic tank . Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Illustration 2 g01432042
Disconnect harness assemblies (2). Disconnect tube assemblies (1). Disconnect hose assemblies (5). Remove bolts (4) and remove control manifold (3).