1915613 VALVE AR-SWING Caterpillar parts
330C L
Rating:
Alternative (cross code) number:
CA1915613
191-5613
1915613
CA1915613
191-5613
1915613
EXCAVATOR,
Compatible equipment models: 1915613:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Characteristics of the 6V3150 Engine Pressure Group:
1. It weighs 2.7 Kg (6 lb) less, without 6V2100 Multitach, than the former 4S6553 Group.2. It comes in a green polyethylene case (plastic) to provide a cost and weight advantage and does not scratch or permanently dent.3. It has an anodized aluminum panel.4. It uses dual scale gauges: inches of water or psi and kPa.5. It is one of the first of a new series of Caterpillar Diagnostic Tools. This family is easily identified by a green polyethylene case with black panels and white printing.6. It has enough space for the storage of the new 6V2100 Multitach (part of 6V3121 Multitach Group) to give a "boost kit" assembled of modular tools.1. Weight: 5.0 Kg (11 lb), without 6V2100 Multitach.2. Size: 39 mm × 311 mm × 101 mm (15.5" × 12.25" × 5.50").3. Gauge Accuracies Over Specified Operating Temperature Range: 4" diameter differential: 2% of full scale2 1/2" diameter single port - SAE Grade "A" (2%-1%-2%)4. Operating Temperature Range: 4" diameter differential gauge: - 1.1 to 60°C (30 to 140°F)2 1/2" diameter single port: - 18 to 71.1°C (0 to 160°F)5. Overrange Pressures: 4" diameter differential gauges: 15 psi2 1/2" diameter single port gauges - pressures above full scale destroy gauge accuracy6. Pressure Media: 4" diameter differential gauges - clean air and gases only, no fluids2 1/2" diameter single port gauges - air, oil, water, antifreeze, diesel fuel7. Operating Position: 4" diameter differential gauges - no effect on accuracy if pointer is mechanically adjusted to zero.2 1/2" diameter single port gauges - no effect on accuracyThe uses of the different gauges in the 6V3150 Engine Pressure Group are listed below.
The 5P6579 Differential Gauge, 4" diameter, is used to measure:
* Crankcase Pressure* Air Inlet Restriction* Exhaust Restriction* Gas Pressure for Gas EnginesThe 6V4016 Gauge (0 to 160 psi), single port, is used to measure:
* Oil Pressure* Air Compressor Cut-in and Cut-out ReadingsThe 6V4017 Gauge (-15 to +60 psi), single port, is used to measure:
* Inlet Manifold Pressure on Turbocharged Engines* Manifold Vacuum on Natural Gas and Gasoline Engines* Power Balancing of Twin Engines in a Natural Gas or Diesel ApplicationThe 6V4018 Gauge (0 to 60 psi), single port, is used to measure:
* Fuel Pressure* Inlet Manifold Pressure on Turbocharged Engines* Cooling System PressureThese uses are examples only but are not the complete list. This group is not limited to "Engines" only, but is a "low pressure" group with many field service uses.
6V3121 Multitach Group
The 6V3121 Multitach Group contains the 6V2100 Multitach and the items needed for its use.
Illustration 3. The 6V3121 Multitach Group.The 6V2100 Multitach is a small digital tachometer that contains a microcomputer which can be programmed by the serviceman to change different input signals into an R/MIN indication which is shown on the front panel readout. It has a range of 40 to 9999 R/MIN with an accuracy of 1 R/MIN. Programming and control of the Multitach is done by use of the touch switches mounted on the
1. It weighs 2.7 Kg (6 lb) less, without 6V2100 Multitach, than the former 4S6553 Group.2. It comes in a green polyethylene case (plastic) to provide a cost and weight advantage and does not scratch or permanently dent.3. It has an anodized aluminum panel.4. It uses dual scale gauges: inches of water or psi and kPa.5. It is one of the first of a new series of Caterpillar Diagnostic Tools. This family is easily identified by a green polyethylene case with black panels and white printing.6. It has enough space for the storage of the new 6V2100 Multitach (part of 6V3121 Multitach Group) to give a "boost kit" assembled of modular tools.1. Weight: 5.0 Kg (11 lb), without 6V2100 Multitach.2. Size: 39 mm × 311 mm × 101 mm (15.5" × 12.25" × 5.50").3. Gauge Accuracies Over Specified Operating Temperature Range: 4" diameter differential: 2% of full scale2 1/2" diameter single port - SAE Grade "A" (2%-1%-2%)4. Operating Temperature Range: 4" diameter differential gauge: - 1.1 to 60°C (30 to 140°F)2 1/2" diameter single port: - 18 to 71.1°C (0 to 160°F)5. Overrange Pressures: 4" diameter differential gauges: 15 psi2 1/2" diameter single port gauges - pressures above full scale destroy gauge accuracy6. Pressure Media: 4" diameter differential gauges - clean air and gases only, no fluids2 1/2" diameter single port gauges - air, oil, water, antifreeze, diesel fuel7. Operating Position: 4" diameter differential gauges - no effect on accuracy if pointer is mechanically adjusted to zero.2 1/2" diameter single port gauges - no effect on accuracyThe uses of the different gauges in the 6V3150 Engine Pressure Group are listed below.
The 5P6579 Differential Gauge, 4" diameter, is used to measure:
* Crankcase Pressure* Air Inlet Restriction* Exhaust Restriction* Gas Pressure for Gas EnginesThe 6V4016 Gauge (0 to 160 psi), single port, is used to measure:
* Oil Pressure* Air Compressor Cut-in and Cut-out ReadingsThe 6V4017 Gauge (-15 to +60 psi), single port, is used to measure:
* Inlet Manifold Pressure on Turbocharged Engines* Manifold Vacuum on Natural Gas and Gasoline Engines* Power Balancing of Twin Engines in a Natural Gas or Diesel ApplicationThe 6V4018 Gauge (0 to 60 psi), single port, is used to measure:
* Fuel Pressure* Inlet Manifold Pressure on Turbocharged Engines* Cooling System PressureThese uses are examples only but are not the complete list. This group is not limited to "Engines" only, but is a "low pressure" group with many field service uses.
6V3121 Multitach Group
The 6V3121 Multitach Group contains the 6V2100 Multitach and the items needed for its use.
Illustration 3. The 6V3121 Multitach Group.The 6V2100 Multitach is a small digital tachometer that contains a microcomputer which can be programmed by the serviceman to change different input signals into an R/MIN indication which is shown on the front panel readout. It has a range of 40 to 9999 R/MIN with an accuracy of 1 R/MIN. Programming and control of the Multitach is done by use of the touch switches mounted on the
Parts valve Caterpillar catalog:
120K, 120K 2, 120M, 120M 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16M, 2290...
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 321C, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D L, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D, 329D L, 330B L, 330C, 3...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 311D LRR, 312D, 315D L, 318C, 319C, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 321C, 321D ...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 311D LRR, 312D, 312D L, 312E L, 314D CR, 314D LCR, 314E LCR, 315D L, 316E L, 318C, 318E L, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 3...
307D, 308D, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, ...
307C, 308C, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D2 L, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D L, 320D LRR, ...
312C L, 315C, 318C, 320B, 320C, 320C FM, 320C L, 321C, 322B L, 322B LN, 322C, 322C FM, 325B L, 325C, 325C FM, 330B L, 330C, 330C FM, 330C L, 330C MH, M325B, M325C MH, W330B
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
120H, 120H ES, 120H NA, 135H, 135H NA, 235B, 311C, 3126B, 312C, 312C L, 3204, 320C, 320C FM, 320C L, 320D, 322C, 323D L, 323D LN, 324D, 324D L, 325C, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 330C...
1090, 1190, 1190T, 1290T, 1390, 205B, 211B, 215, 215B, 225, 227, 229, 2290, 231D, 235, 235C, 235D, 2390, 2391, 245, 2491, 2590, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 C...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 307, 307B, 307C, 308C, 311B, 311C, 312, 312B, 312B L, 312C L, 312D, 313B, 315, 315B, 315B FM L, 315B L, 315C, 315D L, 317B LN, 318B, 318C, 319C, 319D,...
312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 323D L, 323D LN, 324D, 325C, 325D, 325D L, 330C, 330C L, 330D, 330D L
3333893
VALVE GP-PUMP CONTROL
583T, D7E, D7E LGP, D8T
583T, D7E, D7E LGP, D8T
3801371
VALVE GP-RELIEF
844K, 854G, 854K, 990K, 992G, 992K, 993K
844K, 854G, 854K, 990K, 992G, 992K, 993K
2621178
VALVE GP-SOLENOID
TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1565314
VALVE GP-STEER & BRK MANIFOLD
914G, IT14G, IT14G2
914G, IT14G, IT14G2
4T6117
VALVE GP-BYPASS
938G, 938G II, 938H, 950G, D10N, D10R, D9L, IT38G, IT38G II, IT38H
938G, 938G II, 938H, 950G, D10N, D10R, D9L, IT38G, IT38G II, IT38H
3491855
VALVE AR-CHECK & RELIEF
316E L, 318E L
316E L, 318E L
7T0297
VALVE GP-COOLER BYPASS
772B, 773B, 776, 784C, 785C, 785D, 789C, 789D
772B, 773B, 776, 784C, 785C, 785D, 789C, 789D