VALVE GP-CONTROL 2004860 - Caterpillar

Illustration 1 g03404718
Table 1
Specification for 376-3155 Differential and Bevel Gear Gp
Item Qty Part Specification Description
1 1 154-7997 Shim Pack 1. Assemble cover (1) and pin (2) without shim pack (3).
2. Tighten bolts (4) lightly to remove end play.
3. Measure maximum gap between cover and axle housing surface.
4. Select and install shim thickness to provide −0.03 mm (−0.001 inch) (preload) to 0.03 mm (0.001 inch) (end play) in pin.
5 24 6V-3532 Bolt Use the following procedure in order to tighten:
1. Torque to 210 40 N m (155 30 lb ft).
2. Turn an additional angle of 120 10 degrees.
6 24 160-8510 Self-Locking Bolt Use the following procedure in order to tighten:
1. Torque to 130 30 N m (96 22 lb ft).
2. Turn an additional angle of 120 10 degrees.
7 1 395-4177 Bevel Gear Set Assembled backlash is 0.406 0.120 mm (0.0160 0.0047 inch).
8 4 Bolt Torque to 1800 200 N m (1328 148 lb ft).
9 45 178-2991 Self-Locking Bolt Use the following procedure in order to tighten:
1. Torque to 230 30 N m (170 22 lb ft).
2. Turn an additional angle of 120 10 degrees.