VALVE GP-CONTROL 2004862 - Caterpillar

Illustration 1 g03404753
Table 1
Specification for 376-3735 Differential and Bevel Gear Gp
Item Qty Part Specification Description
1 28 178-2991 Self-Locking Bolt Use the following procedure in order to tighten:
1. Torque to 230 30 N m (170 22 lb ft).
2. Turn an additional angle of 120 10 degrees.
2 24 6V-3532 Bolt Use the following procedure in order to tighten:
1. Torque to 210 40 N m (155 30 lb ft).
2. Turn an additional angle of 120 10 degrees.
3 1 395-4173 Gear Set Assembled backlash is 0.36 0.12 mm (0.014 0.005 inch).
4 26 282-0945 Bolt Use the following procedure in order to tighten:
1. Torque to 130 30 N m (96 22 lb ft).
2. Turn an additional angle of 120 10 degrees.
5 1 5V-5669 Shim Pack 1. Assemble cover (6) and pin (7) without shim pack (8).
2. Tighten bolts (8) lightly to remove end play.
3. Measure maximum gap between cover and axle housing surface.
4. Select and install shim thickness to provide −0.03 mm (−0.001 inch) (preload) to 0.03 mm (0.001 inch) (end play) in pin.
9 2 Bolt Torque to 1800 200 N m (1328 148 lb ft).
10 2 Bolt Torque to 900 100 N m (664 74 lb ft).