VALVE GP-LOAD CONTROL 2024093 - Caterpillar

1. Remove three bolts (1) that hold the oil pump (3) on the valve (2). Remove the pump. 2. Remove the covers (8) and (9) from the body (4).3. Remove the washer, spring (10) and plunger (12).4. Remove the relief valve (5), washer, two springs (6) and load spool (7).5. Remove the shims and ring from the load spool (7). Keep the shims and ring with the spool for installation.6. Remove the slug (11) and the selector spool (13). 7. For D3, remove the O-ring seal (14), spool (15) and spring (16) for the accumulator.Assemble Transmission Control Valve
1. Install the slug and selector spool in the body.2. Put the shims and ring on the load spool. Put the small spring in the large spring. Install the springs in the bore of the body for the relief and load spools.3. Install the relief and load spools. Install the plunger, spring and washer.4. For D3, install the accumulator spool and spring.5. Install the covers and bolts in the valve body. Tighten the bolts to a torque of 22 3 lb. ft. (28 4 N m). 6. Install the pump (1) on valve. Install the three bolts that hold the pump on the valve.end by:a) install transmission oil pump and control valve as a unit