2031016 VALVE GP-CONTROL Caterpillar parts
63
Rating:
Alternative (cross code) number:
CA2031016
203-1016
2031016
CA2031016
203-1016
2031016
HAMMER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Glide Brushroll Works with 2032448, 2031016, B102 3545 Vacuum Power
generic Compatible : 3522, 3545, 3574, 3575, 3575-5, 3575-8, 3575-M, 3575-Z, 3590 3590-1, 8975, 8990 Parts : B102 Package Included : 1 Brushroll Bristles complete 13.5" ball bearing assembly balanced, 2 rows of nylon bristles || This replacement component is a premium-grade NON-OEM aftermarket alternative, not manufactured by the original brand. Any use of brand names or model references is solely for compatibility and identification purposes.
generic Compatible : 3522, 3545, 3574, 3575, 3575-5, 3575-8, 3575-M, 3575-Z, 3590 3590-1, 8975, 8990 Parts : B102 Package Included : 1 Brushroll Bristles complete 13.5" ball bearing assembly balanced, 2 rows of nylon bristles || This replacement component is a premium-grade NON-OEM aftermarket alternative, not manufactured by the original brand. Any use of brand names or model references is solely for compatibility and identification purposes.
Brodix 2031016 Cylinder Head
Brodix CNC-Ported to a mirror finish and flow within 1% of each other || The most accurate, best flowing out-of-the-box cylinder heads Available at the best price || Cylinder heads accept all standard pistons, intake manifolds, and rocker arms
Brodix CNC-Ported to a mirror finish and flow within 1% of each other || The most accurate, best flowing out-of-the-box cylinder heads Available at the best price || Cylinder heads accept all standard pistons, intake manifolds, and rocker arms
Brodix 2031016 Cylinder Head
Brodix CNC-Ported to a mirror finish and flow within 1% of each other || The most accurate, best flowing out-of-the-box cylinder heads Available at the best price || Cylinder heads accept all standard pistons, intake manifolds, and rocker arms
Brodix CNC-Ported to a mirror finish and flow within 1% of each other || The most accurate, best flowing out-of-the-box cylinder heads Available at the best price || Cylinder heads accept all standard pistons, intake manifolds, and rocker arms
Number on catalog scheme:
19
For full view, you need register
Compatible equipment models: 2031016:
Information:
Removal Procedure
Disconnect the batteries.
Open the second and third engine bottom guards from the front of the tractor.
Put identification on all wires for installation purposes.
Illustration 1 g00522569
Illustration 2 g00522570
Push back the electrical covers (1) . Remove three nuts (2) in order to disconnect the wires. Remove nut (3) in order to remove plastic cap (4) . Remove the nut underneath the cap.
Illustration 3 g00522571
Fasten a hoist to the starting motor and remove three bolts (5) that fasten the base of the motor to the flywheel housing. Remove the starting motor and the gasket from the machine. The weight of a starting motor is 36 kg (79.0 lb) .
Repeat steps 3 through 5 for the other starting motor.Installation Procedure
Illustration 4 g00522571
Fasten a hoist to the starting motor and install the starting motor and the gasket in the machine. Install three bolts (5) that fasten the base of the motor to the flywheel housing.
Illustration 5 g00522570
Illustration 6 g00522569
Connect the wires and install three nuts (2) . Tighten the three nuts to 30 4 N m (22.0 3.0 lb ft) .
Connect the wires. Install nut (3) and tighten to 2.25 0.25 N m (20 2 lb in) . Install plastic cap (4) .
Repeat steps 7 through 9 for the other starter.
Close the engine bottom guards.
Reconnect the batteries.
Disconnect the batteries.
Open the second and third engine bottom guards from the front of the tractor.
Put identification on all wires for installation purposes.
Illustration 1 g00522569
Illustration 2 g00522570
Push back the electrical covers (1) . Remove three nuts (2) in order to disconnect the wires. Remove nut (3) in order to remove plastic cap (4) . Remove the nut underneath the cap.
Illustration 3 g00522571
Fasten a hoist to the starting motor and remove three bolts (5) that fasten the base of the motor to the flywheel housing. Remove the starting motor and the gasket from the machine. The weight of a starting motor is 36 kg (79.0 lb) .
Repeat steps 3 through 5 for the other starting motor.Installation Procedure
Illustration 4 g00522571
Fasten a hoist to the starting motor and install the starting motor and the gasket in the machine. Install three bolts (5) that fasten the base of the motor to the flywheel housing.
Illustration 5 g00522570
Illustration 6 g00522569
Connect the wires and install three nuts (2) . Tighten the three nuts to 30 4 N m (22.0 3.0 lb ft) .
Connect the wires. Install nut (3) and tighten to 2.25 0.25 N m (20 2 lb in) . Install plastic cap (4) .
Repeat steps 7 through 9 for the other starter.
Close the engine bottom guards.
Reconnect the batteries.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1572017
VALVE AS-RELIEF
115, 315D L, 416E, 63, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 844, 844H, 854G, 854K, 980H, 988G, 988H, 992K, H140CS
115, 315D L, 416E, 63, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 844, 844H, 854G, 854K, 980H, 988G, 988H, 992K, H140CS
2206393
VALVE AS
115, 416E, 63, H140CS
115, 416E, 63, H140CS
1488052
VALVE GP-RELIEF
115, 63, H140CS, H140DS
115, 63, H140CS, H140DS
2580249
VALVE GP-CONTROL
322C, 322C FM
322C, 322C FM