VALVE GP-SOLENOID 2143914 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-4758 Pliers 1
B 1P-1861 Pliers 1
C 8-H0663 Bearing Puller Gp 1
D 126-7178 Puller Leg 2
E 6V-3010 Puller Group 1 Start By:
Remove the bearing block (fan drive). Refer to Disassembly and Assembly, "Bearing Block (Fan Drive) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00880824
Remove snap ring (1) with a Tooling (A).
Illustration 2 g00880832
Remove shims (2).
Illustration 3 g00880836
Place housing (3) on a suitable press.
Remove shaft (4) with a suitable press.
Illustration 4 g00880839
Remove snap ring (5) with a Tooling (B).
Illustration 5 g00880846
Remove elbow (6) and seal (7).
Illustration 6 g00880851
Remove Bearings (8) and (9) with Toolings (C), (D), and (E).