VALVE GP-SOLENOID 2145309 - Caterpillar

Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Illustration 1 g00104545
Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch or to the controls before you service the equipment. These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
422-2980 Coupler Lines Gp - 01    
Item    Qty    Part No.    Description    
(1)     2     7K-1181     Cable Strap    
(2)     1     460-5233     Hose As    
(3)     1     460-5234     Hose As    
(4)     1     3J-1907     O-Ring Seal    
(5)     1     3J-7354     O-Ring Seal    
(6)     1     3V-0046     Plate    
(7)     2     6W-2464     Clamp    
(8)     1     8C-6561     Bolt    
Illustration 2 g03677302
Overview of 422-2980 Coupler Lines Gp
Illustration 3 g03677304
Overview of 422-2980 Coupler Lines Gp on the stick.Installation Procedure
Illustration 4 g03677315
(A) 376.3 5 mm (15 0.2 inch) (B) 578.9 5 mm (23 0.2 inch) (C) 331.6 5 mm (13 0.2 inch)
Install plate, clamps, and cable straps using the measurements provided.
Illustration 5 g03677476
(1) 7K-1181 Cable Strap (2) 460-5233 Hose As (3) 460-5234 Hose As (4) 3J-1907 O-Ring Seal (5) 3J-7354 O-Ring Seal (6) 3V-0046 Plate (7) 6W-2464 Clamp (8) 8C-6561 Bolt
Route hoses (2) and (3) as shown.
Tighten all fittings to standard torque.
Check for leaks.